This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I have a Netgear GS752TP switch. I successfully updated the firmware from 6.0.0.31 to 6.0.0.37. I cannot seem to figure out how to update the firmware past this point. I have downloaded Versions 6.0.0.64, 6.0.1.14, 6.0.1.16, 6.0.1.24 from Netgears web site and none of them will work correctly. When I attempt the update I get an error after about 1 minute that the file format is unrecognized. I noticed that the firmware update from 31 -> .37 used a .BIX file. All of the later firmware updates use a .ROS. Does anyone know how to get past this problem?
There are two different hardware versions for your switch model - the older GS752TP (v1, GS752TP-100xxx) vs. the newer GS752TPv2 (GS752TP-200xxx). Yours is apparently the newer v2 variant, making use of .BIX firmware images, the current version is v6.0.0.37 as of writing - so your switch is up2date.
The other .ROS firmware images are applicable to the v1 hardware variant only, current version is v6.0.1.24 as of writing.
There are two different hardware versions for your switch model - the older GS752TP (v1, GS752TP-100xxx) vs. the newer GS752TPv2 (GS752TP-200xxx). Yours is apparently the newer v2 variant, making use of .BIX firmware images, the current version is v6.0.0.37 as of writing - so your switch is up2date.
The other .ROS firmware images are applicable to the v1 hardware variant only, current version is v6.0.1.24 as of writing.
