Something went wrong with my last post, so I re-try.
I have two M7100 switches and I would like to connect a few servers onto VLAN1 reduntantly via MLAG. I have configured LAG 23 as peer link. On both switches, there is a server (RHEL7) connected to port 17.
Port 17 belongs to LAG3 on both switches, which has been assigned to VPC1.
LAG23 is up. VPC1 seems to work. But LAG3 is down.
I can't ping any other server in VLAN1 from the bonded server.
Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0
802.3ad info LACP rate: fast Min links: 0 Aggregator selection policy (ad_select): stable System priority: 65535 System MAC address: 00:25:90:f9:60:c9 Active Aggregator Info: Aggregator ID: 3 Number of ports: 2 Actor Key: 15 Partner Key: 28 Partner Mac Address: e4:f4:c6:da:78:89
Slave Interface: eno1 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: 00:25:90:f9:60:c8 Slave queue ID: 0 Aggregator ID: 3 Actor Churn State: monitoring Partner Churn State: monitoring Actor Churned Count: 0 Partner Churned Count: 0 Partner Churned Count: 0 details actor lacp pdu: system priority: 65535 system mac address: 00:25:90:f9:60:c9 port key: 15 port priority: 255 port number: 1 port state: 7 details partner lacp pdu: system priority: 32768 system mac address: e4:f4:c6:da:78:89
oper key: 28 port priority: 128 port number: 211 port state: 69
Slave Interface: eth3 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 1 Permanent HW addr: 00:25:90:f9:60:c9 Slave queue ID: 0 Aggregator ID: 3 Actor Churn State: monitoring Partner Churn State: monitoring Actor Churned Count: 0 Partner Churned Count: 0 details actor lacp pdu: system priority: 65535 system mac address: 00:25:90:f9:60:c9 port key: 15 port priority: 255 port number: 2 port state: 7
details partner lacp pdu: system priority: 32768 system mac address: e4:f4:c6:da:78:89 oper key: 28 port priority: 128 port number: 17
port state: 69
=============================================
Config on SW1:
!Current Configuration: ! !System Description "M7100-24X - ProSafe 24-port 10G L2+ Managed Switch, 10.1.0.10, B1.0.0.5" !System Software Version "10.1.0.10" !System Up Time "5 days 7 hrs 36 mins 38 secs" !Cut-through mode is configured as disabled !Additional Packages QOS,IPv6 Management,Routing !Current SNTP Synchronized Time: SNTP Last Attempt Status Is Not Successful ! enable password 8b4659130e00a6d14ea470335b68b559d5a7a6b125844ce64740cfec5c4fc1f76eda80fede8ade8546e093 4f9140f7bb68ee766c4b39490afc0b300163adbf00 encrypted network protocol none vlan database vlan 20,30,40 vlan name 20 "APP" vlan name 30 "ovirtVLAN" vlan name 40 "VCP" vlan routing 1 1 exit configure time-range snmptrap "public" ipaddr 192.168.3.9 snmpversion snmpv1 ip routing username "admin" password 8b4659130e00a6d14ea470335b68b559d5a7a6b125844ce64740cfec5c4fc1f76eda80fede8a de8546e0934f9140f7bb68ee766c4b39490afc0b300163adbf00 level 15 encrypted line console exit line telnet exit line ssh exit port-channel name lag 1 fs5 port-channel name lag 2 fs6 port-channel name lag 3 hv3DB interface 0/17 addport lag 3 exit port-channel name lag 23 peerlink interface 0/22 addport lag 23 exit interface 0/23 addport lag 24 exit snmp-server sysname "switch3.db.schimmel" snmp-server location "iWelt" snmp-server contact "Werner Gold" ! iscsi enable interface 0/1 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit interface 0/2 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit
interface 0/3 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit interface 0/4 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit interface 0/5 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit interface 0/6 vlan pvid 20 vlan participation auto 1 vlan participation include 20 exit interface 0/17 vlan participation auto 1 exit interface 0/22 vlan pvid 20 vlan participation auto 1 exit interface 0/23 vlan pvid 30 vlan participation auto 1 exit interface 0/24 vlan pvid 40 vlan participation auto 1 exit interface lag 1 description 'fs5' port-channel load-balance 7 vlan participation auto 1 exit interface lag 2 description 'fs6' port-channel load-balance 7 vlan participation auto 1 exit interface lag 3 description 'hv3DB' vpc 1 exit interface lag 4 vlan participation auto 1 exit interface lag 5 vlan participation auto 1 exit interface lag 6 vlan participation auto 1 exit interface lag 7 vlan participation auto 1 exit
interface lag 8 vlan participation auto 1 exit interface lag 9 vlan participation auto 1 exit interface lag 10 vlan participation auto 1 exit interface lag 11 vlan participation auto 1 exit interface lag 12 vlan participation auto 1 exit interface lag 13 vlan participation auto 1 exit interface lag 14 vlan participation auto 1 exit interface lag 15 vlan participation auto 1 exit interface lag 16 vlan participation auto 1 exit interface lag 17 vlan participation auto 1 exit interface lag 18 vlan participation auto 1 exit interface lag 19 vlan participation auto 1 exit interface lag 20 vlan participation auto 1 exit interface lag 21 vlan participation auto 1 exit interface lag 22 vlan participation auto 1 exit interface lag 23 port-channel static no spanning-tree port mode vlan participation auto 1 vpc peer-link exit interface lag 24 description 'Main Trunk' port-channel static vlan tagging 1 exit interface vlan 1 routing ip address 192.168.3.72 255.255.255.0 exit feature vpc vpc domain 1 peer-keepalive enable peer-keepalive destination 192.168.11.73 source 192.168.11.72
