XSM4396K1-100NES

[Althaf]

I have a switch XSM4396K1-100NES. In this I need to utilize 10G Copper. 

Please let me know with which module I can utilize the current SFP to 10G Copper.

Thanks in advance.

[LaurentMa · Accepted solution]

Hi Althaf

Please use NETGEAR AXM765-10000S transceiver:
https://www.netgear.com/business/products/switches/modules-accessories/AXM765.aspx

Please use CAT6A wiring and no more than 30 meters. Please ensure your connected copper device or switch autonegotiate to 10GBASE-T Full-Duplex only. If not, please manually set this copper device to 10G full duplex. Because of no auto-negotiation at lower speed or half-duplex on the SFP+ port on the 96X switch side.

I hope this helps!
Regards,

[LaurentMa · Accepted solution]

Hi Althaf

Please use NETGEAR AXM765-10000S transceiver:
https://www.netgear.com/business/products/switches/modules-accessories/AXM765.aspx

Please use CAT6A wiring and no more than 30 meters. Please ensure your connected copper device or switch autonegotiate to 10GBASE-T Full-Duplex only. If not, please manually set this copper device to 10G full duplex. Because of no auto-negotiation at lower speed or half-duplex on the SFP+ port on the 96X switch side.

I hope this helps!
Regards,

[Althaf]

Thank you very Much for the quick answer. Appreciate that.