Reply

Re: LTE aggregation Needs to be updated for MR1100

Ksa3344
Apprentice

LTE aggregation Needs to be updated for MR1100

right now the carriers keeps enabling new LTE bands aggregation, for example my MR1100 eus doesn't aggregate 2300+2300+1800 which is new
but it does with 2300+2300 only to my carrier .
Also 1800+1800+700 is not supported but it is supported in Telstra version.
Is it because the firmware or the aggregation methods inside the firmware ?

Also will the MR1100 getting more updates or it will stop cause a newer version is out ?

Model: MR1100|Nighthawk M1 Mobile Router
Message 1 of 9

Accepted Solutions
JohnPeng
NETGEAR Expert

Re: LTE aggregation Needs to be updated for MR1100

Sure. That would be great if you can help to collect these information. We will prioritize them for our future maintenance releases

 

Thanks

John Peng

View solution in original post

Model: MR1100|Nighthawk M1 Mobile Router
Message 5 of 9

All Replies
Ksa3344
Apprentice

Re: LTE aggregation Needs to be updated for MR1100

a new aggregation worked on phone but doesn't work in nighthawk .
B28+B40
B28+B40+B3
Message 2 of 9
JohnPeng
NETGEAR Expert

Re: LTE aggregation Needs to be updated for MR1100

Thanks for the suggestions. Could you please specify which carriers are enabling these CA combos?

 

 

John Peng
Model: MR1100|Nighthawk M1 Mobile Router
Message 3 of 9
Ksa3344
Apprentice

Re: LTE aggregation Needs to be updated for MR1100

Actually I live in Saudi Arabia .
Here we use the EUS version cause it supports all bands of our five Telecom companies here .

and the CA combos i mentioned belongs to Saudi Telecom Company known as STC .
also there is combos for defferint companies i could ask pple to give me the combos for you if its ok .
Message 4 of 9
JohnPeng
NETGEAR Expert

Re: LTE aggregation Needs to be updated for MR1100

Sure. That would be great if you can help to collect these information. We will prioritize them for our future maintenance releases

 

Thanks

John Peng

View solution in original post

Model: MR1100|Nighthawk M1 Mobile Router
Message 5 of 9
Ksa3344
Apprentice

Re: LTE aggregation Needs to be updated for MR1100

Hello again ,
These are the working combos i got after asking arround .
B28+B40

B40+B40+B3

B40+B40+B40

B3+B3+B28

B3+B28+B40

B1+B28+B3+B3

B40+B40+B1+B3

B41+B41+B41+B41

B28+B28+B3+B1

B38+B38+B38+B38

B40+B40+B40+B40

B8+B20+B1+B3

B3+B1+B8+B38

Thank you so much for your hard work guys .
Message 6 of 9
vitaly
Tutor

Re: LTE aggregation Needs to be updated for MR1100

To me is was a bit surprising to realize that the device does not support B3+B38 and vice versa. Is it possible to add this combination to a new firmware? The network is 250-01. With the current firmware my MR1100 EUS is much slower in this network, than iPhone 8... P.S. It seems like, the same for the MR2100 router. But I'm not 100% sure...

Model: MR1100|Nighthawk M1 Mobile Router
Message 7 of 9
Ksa3344
Apprentice

Re: LTE aggregation Needs to be updated for MR1100

If this combo i mentioned above B3+B1+B8+B38
included with the future releases it should cover what you are asking for ,i guess.
Message 8 of 9
Mr_Khalid
Guide

Re: LTE aggregation Needs to be updated for MR1100

B3+B3+B1+B28

B41+B41+B41+B41
Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 2514 views
  • 4 kudos
  • 4 in conversation
Announcements