Netgear nighthawk M1 , Web admin login redirected and blocked

[MFK2020]

Greeting all , 

I changed the Gate way default on the rooter to 192.168.1.2 to avoid the conflict with another modem.

The modem is on IP passthrough

Now when I'm trying to get access to the modem with Chrome it said'  m.home/index.html?redirect=blocked&URL=m%2Ehome '

So I do not have any access to the modem WIFI,LAN, or USB

I want to avoid to reset it 

If there is any chance to get it that will help a lot 

Thanks 

[MFK2020 · Accepted solution]

I finally reset the M1 , I could not set the default gate way as 192.168.0.1 , it  only accept 192.168.1.4 , so I set it as 192.168.1.4

Now it's working well and I can have access on it and no conflict with the other modem 

Thanks John  and others for the support 

[michaelkenward]

---

@MFK2020 wrote:

Greeting all , 

I changed the Gate way default on the rooter to 192.168.1.2 to avoid the conflict with another modem.

The modem is on IP passthrough

What is that "other modem"? How is it connected to the net6work?

Your description suggests that you need to rethink what you are doing to avoid local clashes.

What is Double NAT? | Answer | NETGEAR Support

If your modem is one of the various Netgear M1 devices (MR1100?), it is not one of the General WiFi Routers (Non-Nighthawk and Non-Orbi) devices covered in this section.

While many questions about routers are generic and could be answered anywhere, some things need specialist knowledge.

You might get more help, and find earlier questions and answers specific to your device, in the appropriate section for your hardware. That's probably here:

Mobile Routers, Hotspots & Modems

Those things are very different from the standard Netgear routers covered in this section.

You might like to search there for messages related to your problem.

I will ask the Netgear moderator to move your message.

In the meantime you could visit the support pages:

Support | NETGEAR

Feed in your model number and check the documentation for your hardware. Look at the label on the device for the model number.

Check for various troubleshooting tips.

You may have done this already. I can't tell from your message.

I mention it because Netgear stopped supplying printed manuals and CD versions some years ago and people sometimes miss the downloads.

[MFK2020]

Hi , 

Thanks for the answers 

The other modem was either another M1 or a TP link , 

I had both connected because one was connected to the internet and the other one was setting up to work on the internet. 

But the problem is not there it's  way I cannot get to the admin web access 

[JohnPeng]

Using 192.168.1.2 should be able to access the WebUI.

Please connect the device using USB cable to your computer and check IPconfig whether IP gateway is set correctly to 192.168.1.2? The USB port IP address should be 192.168.1.4.

Thanks

[MFK2020]

Thanks John for your reply , 

I did already my default gateway is 192.168.1.2 both USB or LAN,

 I tried all IP .4,.5,.6 just in case without success 

Also with  different computers and systems, the web page still redirected and blocked. 

I don't know if there is another way to read the M1 setting 

[JohnPeng]

USB default IP must be 192.168.1.4, which is set on FW and can't be changed. If you change the gateway IP to 192.168.10.1, USB IP will be 192.168.10.4.

Make sure when you change the default gateway, the LAN IP range is also updated accordingly.

Thanks

John

[MFK2020]

I like this path 

I did change my default gateway when I had the chance to reach the M1 setting I change it to 192.168.1.2 because it was conflicting with my other modem 

So which IP I will use now  ?

[JohnPeng]

If the gateway IP is conflicting with your other network, you should change the gateway IP to the following:

192.168.x.1 - x can be any number, except 1. Then M1 will be on a different subnet. You still can use the same subnet mask as 255.255.255.0

Thanks

John

[MFK2020]

That was my mistake at the first place, I should have set the default gate way on 192.168.0.1 instead of 192.168.1.2

For the conflict between the modems, now it's ok , I use a personal computer which is not connected to the network.

I don't now why the URL is redirected. 

[MFK2020 · Accepted solution]

I finally reset the M1 , I could not set the default gate way as 192.168.0.1 , it  only accept 192.168.1.4 , so I set it as 192.168.1.4

Now it's working well and I can have access on it and no conflict with the other modem 

Thanks John  and others for the support