Nighthawk M1 how to connect to deco mesh

[Smiller14559]

How can I connect my M1 to my deco router system

[Blanca_O · Accepted solution]

Hi Smiller14559, 

Welcome to NETGEAR Community!

You can enable IP Pass-Through Mode to turn off the mobile router functionality and assign the network IP address directly to the attached device. 

To enable IP pass through mode:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
3. Enter the administrator login password. The password is case-sensitive.
4. Select SETTINGS > Setup > Router Setup.
5. Select the IP PASSTHROUGH ON button.

Regards,
Blanca
Community Team

[Blanca_O · Accepted solution]

Hi Smiller14559, 

Welcome to NETGEAR Community!

You can enable IP Pass-Through Mode to turn off the mobile router functionality and assign the network IP address directly to the attached device. 

To enable IP pass through mode:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://192.168.1.1.
3. Enter the administrator login password. The password is case-sensitive.
4. Select SETTINGS > Setup > Router Setup.
5. Select the IP PASSTHROUGH ON button.

Regards,
Blanca
Community Team