- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: EERO and ReadyNAS
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
EERO and ReadyNAS
I have two ReadyNAS (a 2TB and 4TB). I recently moved to use an "eero pro" for mesh wifi. Both devices are not showing up on my network although they're wired (over ethernet) to the eero. The DHCP in the eero says one was assigned to 192.168.4.30, but when I run raidar (linux on wifi) I get "Found 0 total systems":
; ./bin/raidar-cli -v got 3 interfaces: IP=172.17.0.1 Mac=02:42:29:a4:4a:23 BroadAddress=172.17.255.255 IP=172.18.0.1 Mac=02:42:04:93:e2:be BroadAddress=172.18.255.255 IP=192.168.4.30 Mac=4c:34:88:54:26:b2 BroadAddress=192.168.7.255 sent primer with sid=0xffffffff cid=0x3cf64 Found 0 total systems
I was hopeful that it might be the 192.168.4.30, but that didn't work
ping 192.168.4.30 PING 192.168.4.30 (192.168.4.30) 56(84) bytes of data. 64 bytes from 192.168.4.30: icmp_seq=1 ttl=64 time=0.052 ms 64 bytes from 192.168.4.30: icmp_seq=2 ttl=64 time=0.040 ms 64 bytes from 192.168.4.30: icmp_seq=3 ttl=64 time=0.082 ms curl -v 192.168.4.30 * Trying 192.168.4.30:80... * TCP_NODELAY set * connect to 192.168.4.30 port 80 failed: Connection refused * Failed to connect to 192.168.4.30 port 80: Connection refused * Closing connection 0 curl: (7) Failed to connect to 192.168.4.30 port 80: Connection refused
Running "arp -a" gives me no luck. I would need to be on the wired network for that, or eero would provide (which I can't find)
ping -b 255.255.255.255
WARNING: pinging broadcast address
PING 255.255.255.255 (255.255.255.255) 56(84) bytes of data.
64 bytes from 192.168.4.34: icmp_seq=1 ttl=64 time=22.2 ms
64 bytes from 192.168.4.34: icmp_seq=2 ttl=64 time=43.7 ms
arp -a
YR00DP168499.local (192.168.4.38) at 88:de:a9:23:aa:95 [ether] on wlp3s0
eero-18\05890\05888\058b3\0580e\05880.local (192.168.4.42) at 18:90:88:b3:0e:92 [ether] on wlp3s0
iMac-2.local (192.168.4.34) at ec:35:86:30:c1:b4 [ether] on wlp3s0
_gateway (192.168.4.1) at 74:b6:b6:8a:10:6d [ether] on wlp3s0
How can I further debug this?
Everything has been power cycled multiple times.
Thanks for any advice.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: EERO and ReadyNAS
I'm not familiar with RAIDar on Linux, but this doesn't seem quite right:
IP=192.168.4.30 Mac=4c:34:88:54:26:b2 BroadAddress=192.168.7.255
The listed addresses are in different subnets. Did you previously have your LAN subnet as 192.168.7.xxx, and might you have assigned the NAS a static IP in that range?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: EERO and ReadyNAS
Also, did you try browsing to http://192.168.4.30/admin instead of using curl?