RN214, Pro Pioneer RNDP 600E, NV+ with UPS monitoring

[Joe-9O]

Hello,

I'm having problems trying to get my RN214 ReadyNAS server to monitor a UPS connected to an NV+ UPS to USB. I also have a ProPioneer monitoring the UPS without issue.

Any suggestions would be welcome.

Thank you!

UPS Model: CyberPower LX1500GU

NV+

IP: 192.1.106 (connected by USB to CyberPower UPS)

Enable network monitoring of attached UPS (on)

Hosts allowed access: 192.168.1.0/24

Pro Pioneer

Enable monitoring of UPS physically attached to a remote ReadyNAS

Remote IP address: 192.168.1.106

(works ok)

RN214

Under “Power”, UPS selected “+”

Name: NVPlusUPS

Description: (left blank)

Type: Remote UPS

Address: 192.168.1.106

User: Admin

Password: ********

(I have also tried with no admin and pwd)

[StephenB · Accepted solution]

---

@Joe-9O wrote:

RN214

Under “Power”, UPS selected “+”

Name: NVPlusUPS

Description: (left blank)

Type: Remote UPS

Address: 192.168.1.106

User: Admin

Password: ********

(I have also tried with no admin and pwd)

---

The user/password is 

user: monuser
password: pass

See page 207 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/READYNAS_OS_6_SM_EN.pdf

[StephenB · Accepted solution]

---

@Joe-9O wrote:

RN214

Under “Power”, UPS selected “+”

Name: NVPlusUPS

Description: (left blank)

Type: Remote UPS

Address: 192.168.1.106

User: Admin

Password: ********

(I have also tried with no admin and pwd)

---

The user/password is 

user: monuser
password: pass

See page 207 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/READYNAS_OS_6_SM_EN.pdf

[Joe-9O]

Thank you!!

It never occurred to me that I needed to use the specific UPS name "UPS" for remote monitoring.

I feel silly for not having looked at the user manual