This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
Hi everyone! Need some help with rn212. It suddenly hanged and I rebooted it. During reboot power button blinks as usual, but a minute later it starts blinking like 2 short 1 long blink. Neither router nor raidar can't see the device. What can I do with it? Thanks in advance
You may try booting up the NAS without the drives inside it (Note: Please label drives with its corresponding bay before you remove it) and see if RAIDar will detect it. The RAIDar should detect it with a status of 'No disks detected'.
If NAS is still not detected by RAIDar, it is highly possible that the issue is with the chassis already.
You may try booting up the NAS without the drives inside it (Note: Please label drives with its corresponding bay before you remove it) and see if RAIDar will detect it. The RAIDar should detect it with a status of 'No disks detected'.
If NAS is still not detected by RAIDar, it is highly possible that the issue is with the chassis already.
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as a solution so others can be confident in benefiting from the solution.
The NETGEAR community looks forward to hearing from you and being a helpful resource in the future!
