This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I've a 314 NAS (mounted as drive M:\) behind a HP-Procurve-Switch, for some reasons (ransomwareprotection) I disconnect that certain switch port by snmp-command - thats no problem.
Later then I reestablish that connection - switching that certain switch-port on.
Then it lasts between 10 and 30 minutes, till I can access the NAS by drive-Letter which is M:\.
Interesting is, that after switching the Procurve-Switchport on, I can access that NAS Admin-Page immediatelly, but why not the drive M: which is connected via SMB to my Windows system.
Whats the reason for that behaviour and/or is there configuration to improve - shorten that time afer switching port on an ability to connect to M:\ - the situation ?
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I installed the latest Firmeware (6.7.4.) on my NAS some days ago and now I thought to test whether something has changed relating to my problem.
Indeed, when I disable my Switch-Port (where NAS is connected to) and then (re-) enable that Switch-Port (HP-Procurve-Switch, disabling/enabling via SNMP-Command) then it lasts 10 seconds!!!! until I have a SMB-Connection to my NAS.
Amazing, thank you for your effort spent in my case.
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
as far as I can see in the logs there is nothing in particular - I jotted the time down when I did my tests 10:32 and at that time there no log-entries
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I tried that (putty and then entered your commands) and checked by using cat on that file smb.conf.overrides. It was put in there.
But nothing changes.
Than I tried to reboot my NAS to put parameters in work - the same problem - reboot finished at 15:31 (could access via Putty and/or Web) but couldnt connect via UNC-Path or drive-letter which was still stored.
But then at 15:39 I could connect to UNC-Share, everything works fine.
Changed but the problem persists because I cant and dont wanna wait up to 10 minutes (in this case, who knows, how this time vary).
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I'm still looking how to improve that situation - I want to enable my HP-Procurve-Switch-Port (e.g. Port 12), where my ReadNas is connected to, and then I want to access the Readynas SMB-Share.
Immediatelly after enabling the switch-port 12 I can access Readynas via Telnet, Web but not via SMB - therefore I've at least to wait 10 minutes.
How to decrease that time, I've to wait for SMB-Services ?? E.g. if thats 30 sec or 2 minutes ok, but not 10 or more minutes!
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I want to disconnect and reconnect my NAS by disabling/enabling my HP-Procurve-Switches Port by SNMP.
Till now, it was not my plan to reboot NAS after enabling my Procurve.
But as I learned to know, after a NAS reboot it lasts minutes (I would say 5 - 10 min) too till I can access the NAS via SMB (http and telnet access work instandly after a reboot), looks like as it is the same issue rebooting or switching that Procurve-Port on.
Re: reestablishing SMB-Connections lasts up to 30 minutes
Hi,
I installed the latest Firmeware (6.7.4.) on my NAS some days ago and now I thought to test whether something has changed relating to my problem.
Indeed, when I disable my Switch-Port (where NAS is connected to) and then (re-) enable that Switch-Port (HP-Procurve-Switch, disabling/enabling via SNMP-Command) then it lasts 10 seconds!!!! until I have a SMB-Connection to my NAS.
Amazing, thank you for your effort spent in my case.
