This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
NETGEAR ReadyNAS Quick Installation vs new harddrives
Quick Installation, mounting holes in new harddrives.. only 2, one front and one hole back. So the middle hole is gone. Do you just cut of the middle plastic pin? And use the one pin back, or do they sell replacment quick mount with pins front back 🙂 ?
Do you just cut of the middle plastic pin? And use the one pin back, or do they sell replacment quick mount with pins front back 🙂 ?
No, you remove the plastic insert in the tray, and mount using the holes in the bottom of the tray. Instructions are in the hardware manual if you need them (look in section on SSDs). Keep the insert, as it could be useful in the future.
Netgear included screws for mounting drives to the tray bottom, hopefully you still have them. With your older trays, you'll only have one pair of holes that align (The ones furthest from the SATA interface).
We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The Netgear community looks forward to hearing from you and being a helpful resource in the future!
