Reply

MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

niallg
Aspirant

MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

My router updated to V1.1.6.124 yesterday and now access control from the iphone app no longer works. There is a new slider when you select the device, but the slider is grayed out and you cannot change it.  This setting can still be updated using the web interface.  Anyone else have this problem?

Message 1 of 6
FURRYe38
Guru

Re: MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

Got a screen capture of this? 

Is Armor enabled? 

Has a factory reset and setup from scratch been performed since update? 

Be sure to disable WiFi Private Address and  Limit IP Address Tracking on Apple devices. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Router Mode |  Wifi Router CAX800 (Router Mode) and RBK963 (APMode) | and MK63 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M |

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, XR1000, EX7500/EX7700

Message 2 of 6
niallg
Aspirant

Re: MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

No. Reboot is as far as I went.

See example screenshot attached. Before the upgrade there were pause and play buttons to block and unblock devices.
Message 3 of 6
FURRYe38
Guru

Re: MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

Is this behavior seen for all devices? 

Possible new app update did something. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Router Mode |  Wifi Router CAX800 (Router Mode) and RBK963 (APMode) | and MK63 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M |

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, XR1000, EX7500/EX7700

Message 4 of 6
niallg
Aspirant

Re: MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

Yes it’s the same for all devices. That was only an example. I did a factory reset and setup yesterday It is the same. Either the new app version or the latest firmware has broken this functionality.
Message 5 of 6
FURRYe38
Guru

Re: MR60 / MS60 Firmware Version 1.1.6.124 Access Control No Longer working

Be sure to disable WiFi Private Address and Limit IP Address Tracking on the any Apple phones or pads. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Router Mode |  Wifi Router CAX800 (Router Mode) and RBK963 (APMode) | and MK63 (Router Mode) | Switches NG GS105/8, GS308v3, GS110MX and XS505M |

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, XR1000, EX7500/EX7700

Message 6 of 6
Discussion stats
  • 5 replies
  • 810 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 6E