×

Introducing the Orbi 970 Series Mesh System with WiFi 7(BE) technology. For more information visit the NETGEAR Press Room.

Nighthawk Mesh WiFi

Welcome to the Nighthawk Mesh Community


Advanced Whole Home WiFi Click to Buy Nighthawk Mesh WiFi 6
Reply

Re: MK83 devices refuse to connect to both satellites

CallPaul
Apprentice

MK83 devices refuse to connect to both satellites

Recently purchased a MK83 system with two satellites. Firmware is updated and the satellites are 30-40 ft. away from the router. Not matter what I do no devices will connect to either of the satellites by wifi, ever. The web gui and the app show zero connected devices to a satellite, only to the router. Both satellites show being connected, blues lights but it’s like they’re not even there.  I understand the devices determine which node to connect to but the satellites are pretty far apart and they still refuse to connect to a satellite.

I’ve set up dozens of mesh systems, Orbi, Velop, TPLink, ASUS, you name it, I’ve never experienced an issue like this.

Any ideas or has anyone else experienced this issue with a possible fix?

Message 1 of 9
plemans
Guru

Re: MK83 devices refuse to connect to both satellites

Have you logged into the satellites and looked on their connected device list? 

whats between the router and the satellites? (walls and what made of)

Have you tried setting the 2.4ghz/5ghz broadcast power down a little? 

Message 2 of 9
CallPaul
Apprentice

Re: MK83 devices refuse to connect to both satellites

Hey Plemans,

I did a full reset and new setup and everything seems to be working well.

The app continues to show no devices connected but when I login to the satellites it does show 

the devices connected to them. So far so good.

Thanks for the tips it helped.

Message 3 of 9
plemans
Guru

Re: MK83 devices refuse to connect to both satellites

Must just be an app issue then if they're showing when you log into the satellites. 

You can report a bug on it. Follow the guide here: 

https://community.netgear.com/t5/Nighthawk-App/How-to-report-a-bug-on-the-Nighthawk-App/m-p/2134684#...

 

 

Message 4 of 9
iyang
NETGEAR Expert

Re: MK83 devices refuse to connect to both satellites

Hi @CallPaul ,

 

Can we know below information ?

- What's FW version for MK83 ?

- What's App version ?

- How many connected devices in MK83 ?

 

 

Thanks.

Message 5 of 9
CallPaul
Apprentice

Re: MK83 devices refuse to connect to both satellites

Latest firmware installed. Latest iOS app version installed.

Approximately 30 devices across router and two satellites.

If I log into the satellites themselves it does show what’s connected to each one.

On the iOS app it shows no devices on either of the satellites but they show as all 

being connected to the router.

Message 6 of 9
iyang
NETGEAR Expert

Re: MK83 devices refuse to connect to both satellites

Thanks @CallPaul for the reply.

 

Could you share the screenshot from App ?

Or do you try to click "network map" -->  click "satellite" icon to see the connected devices from App ?

 

Thanks.

 

 

Message 7 of 9
CallPaul
Apprentice

Re: MK83 devices refuse to connect to both satellites

I used network map, then satellites and then connected devices in the app as you described.

Message 8 of 9
CallPaul
Apprentice

Re: MK83 devices refuse to connect to both satellites

After going back and forth a bit between the app and logging directly into the satellites it seems

there’s a bug in the iOS app that doesn’t allow connected devices to appear for each satellite.

Can anyone else confirm this on their iOS app?

Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 1403 views
  • 2 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7