NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
wnr2000v3 in initial setup not connecting with reolink ip camera
I recently got a Reolink Argus 2 wireless camera for a gift. I connot connect with initial set up instructions provided by reolink. I own an additional Reolink RLC-410WS camera with 3 more YI camera...
The Argus 2 and the RLC 410 both are specifically for a 2.4 Ghz router according to the user manual for both cameras. When I go in the settings of the router and downgrade the security settings from WPA-PSK/WPA2-PASK to no security option the camera will connect to the router on initial setup and function normally along with the RLC-410WS but the 3 other YI indoor cameras drop off and loose connection with router.
I will try it the reverse way as you suggested, stay in security mode but disconnect other cameras and see what happens.
OK, does appear I was over doing it with the cameras. After I disabled YI cameras, initial setup for the argus 2 went smoothly. Time to upgrade! Thanks for your input. Cheers!
Glad you got it figured out!
UPDATE!
Just bought and upgraded to a netgear AC1600 (Brand New) buutt its not connecting to the internet. Shows it as connected but absulotely no speed. Did a speed test and shows 75 kbps. Then connected staight to modem via ethernet, it works great. There has to be asetting that is not right. Any feedback on this new issue would be appreciated!
