I get the error again with QOS: RPC error 'ERROR_NOENT': Rule not found in chain. I don't want to annoy you though..When will we finally get a new update? It's long overdue.
will the update come out this week? 104 goes very bad, also for apex legends the hit detection is very bad unplayable at least from Spain, I do not know if it will be the servers or that the router does not improve the hit detection, I have already modified qos in all the values and nothing, geofilter off since for this game it does not work.
XR500 nighthawk pro gaming: XR500 V2.3.2.104-DumaOS3.0-Beta
hello I allow myself to post this message on the forum, for me the duma os 3.0 is not stable in beta version it is still in ALPHA version I think because too much problem of instability we do not even know if the dev is working on the problems that the community encounters
first: the fact that we always have to restart the router because it crashes.
secondly: the QOS does not work at all, the bandwidth allocation does not privilege my xbox consoles, and PS4 (it marks me Device not found.) therefore impossible to allocate the bandwidth to the consoles.)
thirdly: impossible to add my consoles in the geofilter (Uncaught Unmatched device) or my 2 consoles are connected
Here are for my part the problems encountered I hope that the dev will work on the problems encountered by the community and it would be good if we are informed by the dev that a new update is available with the date and time at which this said version is available
@minino I don't have a specific date for an update. Are you selecting the closest server on the game itself?
@n3xt3l We are working on the issues of course. What do you mean by it crashes? I'm not understanding the issue with Bandwidth Allocation, where does it say device not found for PS4? You need to rename the consoles to what they were named before or do a factory reset, the latter would be better to fix that issue, also sounds like you may not have done that after upgrading which is recommended.
For what it's worth, I'm running the build, and have had zero problems. Prioritization works the way it should, consoles are added to the geofilter, and havent had any crashing outside of the ping heatmap occasionally, but a cache clearing in the browser rectifies that. Best thing to do, which worked for me, is do a complete factory reset, name your network to an arbitrary SSID and run from there. as far as the consoles not being allowed into the geofilter, you have to go into the device manager and make sure the devices are set as games consoles. Only then, will the geofilter allow them to be added. Prioritization will kick in from there. Also, set your bandwidth allocation to the service instead of device, as in my experience, that seemed to work out better for me. Hope this helps you out a little.
XR500 nighthawk pro gaming: XR500 V2.3.2.104-DumaOS3.0-Beta
hello I allow myself to post this message on the forum, for me the duma os 3.0 is not stable in beta version it is still in ALPHA version I think because too much problem of instability we do not even know if the dev is working on the problems that the community encounters
first: the fact that we always have to restart the router because it crashes.
secondly: the QOS does not work at all, the bandwidth allocation does not privilege my xbox consoles, and PS4 (it marks me Device not found.) therefore impossible to allocate the bandwidth to the consoles.)
thirdly: impossible to add my consoles in the geofilter (Uncaught Unmatched device) or my 2 consoles are connected
Here are for my part the problems encountered I hope that the dev will work on the problems encountered by the community and it would be good if we are informed by the dev that a new update is available with the date and time at which this said version is available
alex i had to reformat my router serveral times, its either qos not working or geo filter not working unstable upload speed traffic prioitization cancelling qos auto bandwidth only wanting to give me 400 download and 600 upload. so i had to keep reformating then after i reformat i had to unplug router for 30 secs then check and see what was good and bad, aftwer about 20 plus reformats i finally got most of the apps working all but the auto speed still wants to nerf the heck out of my bandwidth. seems crazy but it is almost like winning the lotery
Just enter the speeds manually, we're working on improving it, it's using the same server as benchmark which is why it reports a little low at the moment.
Probably not. I’m sure a stable release won’t be out till next year at the earliest. Your probably better off buying a router that already has a stable build with the 3.0 firmware. They don’t care about us older router guys and just push firmware out on newer routers with stable builds. Also this is a alpha not a beta see how many problems everyone is having and they just give the run of the mill answer “we’re working on it and it should be out next week and the next week after that. Buy a different product that is not Netgear that’s porting the duma firmware over cause this **bleep** don’t work. The only stable build I can run is the .20 and that means losing most of the features everyone bought this router for unless you buy a router that has the stable build on it. Rant over. You’ll get the update whenever it’s available. So everyone stop asking cause it’s always gonna be next week 😉 or working on it. Nothing against the mods but iiwii.
I can only tell the 'beta' is working fine for me, no problems, and good hitreg in CoD.
Much better then the previous DumaOS.
Then for the releases of updates for the beta, it can be better.
Fix one thing in a sprint and then release it for testing. It is a beta test after all.
I dont get the reason that Netgear has to aprove the next build. It is no hardware change and it only delays the software devellopment that is done by Netduma.
It is Netgear hardware so they decided what is released onto the platform. Also the software on the XR routers isn't all purely developed by us so they have their own QA processes etc and procedures we have to follow.
I have upgraded to DumaOS 3.0 Beta Firmware V2.4.2.104 and am running into stability issues.
I am able to sustain a stable connection from the router for 12-24 hours before I lose connection from all my devices. Only after rebooting the XR500 will the connection come back.
I have noticed that DumaOS can be extremely slow to load as well, sometimes taking over 5 minutes for dashboard to appear after login.
CPU Usage was very unstable at first, hovering at around 90-100%. This happened immediately after upgrading to the Beta firmware. Although, after factory resetting and starting on a fresh build of the Beta, CPU usage went down drastically (at around 20-30%). Unfortunately though, the factory reset did NOT help the disconnect issues I am experiencing daily on this Beta build. No settings have been changed after factory reset, and it is still dropping connection. For reference, looking at the Network Map, I have 12 Devices on the 5ghz band, 19 Devices on 2.4ghz band, and 10 on Lan. Router will disconnect randomly within a 24 hour window, sometimes under minor load, other times it will disconnect without any network load at all.
I have uploaded a log file screenshot if that helps too.
I am excited for the future of DumaOS 3.0, and I understand this is a beta. I would be happy to help make this more stable by providing additional feedback if needed. Thanks
This experience is kind of putting me off though to be fair, I won't be buying another Netgear router with Duma OS on it.
While I fully respect that Netgear need to QA an update, it's a "BETA" build, and the fact that Netduma are the ones being made to look bad as you provide the routers OS, you're copping the flack for their heel dragging, which I called out their Nighthawk Gaming twitter account and they quickly went silent.
I'd personally get your CEO to start threatening legal action or withdrawal of the agreement to provide Duma OS to Netgear, and get them to speed their process up as it's been far too long getting these crucial fixes out for testing by the people who actually bought the router for the promised features, which worked for one build and then promptly broke.
Keep chipping away at them and get them to spilt the OS and drivers so that you can speedily push updates out.
3.0 works on xr1000 and i bet even better on the xr700 probablly better than xr1000 and they cant get it to work on others such a joke and a waste of money,this whole process was backwards should of came out on xr700. now prob never for xr700 that i paid over $499 for
@Smewy we're looking into that disconnection issue with NG currently. Regarding slow loading, clear the browser cache/cookies then try to load each page once and should be faster after that.
@gdwwdg It will be coming to the XR700 I assure you.
