× Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
Orbi WiFi 7 RBE973
Reply

Re: New Firmware v2.3.2.108 (XR500)

mardock2009
Guide

Re: New Firmware v2.3.2.108 (XR500)

Hi

how to add ssl certificate to my router remote control by https?

i have valid certyficate and telnet access to router

thx

Model: XR500|Nighthawk Pro Gaming Router
Message 451 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

That's not possible to do unfortunately. It's a local site and there is no sensitive information input so it's perfectly safe.
Message 452 of 769
Nicator
Tutor

Re: New Firmware v2.3.2.108 (XR500)

I don't like playing the disgruntled customer, but the XR500 has been a major, major disappointment for me. I upgraded from the original Netduma R1 to the XR500 in the belief that the hardware would offer a nice upgrade. In return I got a router with glaring issues. I've been having issues with my internet disconnecting for months but never posted here because it was infrequent enough that I could sort of ignore it.

Previously looking through the logs when the disconnects occured would show DDOS attacks. Through Google and posts on this forum I learned that there was no reason to fear, and that this shows that the router was doing its job. Great! But my internet just disconnected and it took a few minutes to return. I got kicked out of the game I was playing and I can't return. This is a router doing its job?

But that's one thing. The past week or so it has been almost impossible to play. My internet just disconnected on me 5 games in a row. Shows either something about a DHCP lease in the log or nothing at all. It's absolutely embarassing that the entire house which is serviced by a cheap router has internet whilst I have my personal very expensive gaming router which fails on me.

I actually just decided to just go back to the R1 in the hope that it's more stable. Is anything being done about the XR500? When can I expect something to be done?

Model: XR500|Nighthawk Pro Gaming Router
Message 453 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

I'd recommend you upgrade to the .114 version Tim has provided and see if that improves it as it has a fix for DHCP issues and may resolve it.
Message 454 of 769
minino
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

where are the .114?

Message 455 of 769
Nicator
Tutor

Re: New Firmware v2.3.2.108 (XR500)

Hi Fraser, I did. Getting disconnected in the game after I upgraded to v.114 prompted me to just give up and replace the XR500 with my Netduma R1.

Message 456 of 769
tekonsite
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

I have been reading the posts as they come in and Tim has been working with XR500 users to try and fix the DHCP issue. I am glad Netgear is finally taking this issue seriously. The amount of XR500 customers with this problem is increasing. Due to the Pandemic there is more demand on our home networks and it is showing the issues within the Netgear XR500 product that have been overlooked or have been put up with in the past. Customers should not have to put up with these issues as Netgear demands a premium cost for this product. As a customer we demand a product that actually works as described on the box. Microsoft and Nintendo are experiencing lawsuits in regards to poorly developed and engineered hardware with issues rising on their gaming controllers (Google this if interested). We as a customer needs to demand quality for the money when we purchase from Netgear also. What do you guys think?
Message 457 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

@minino you can find it here: https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/New-Firmware-v2-3-2-108-XR500/m-p/2...

@Nicator if you haven't already I would highly recommend doing a factory reset once on that firmware to ensure no issues have carried over.
Message 458 of 769
Nicator
Tutor

Re: New Firmware v2.3.2.108 (XR500)

Alright, thanks. That's one thing I haven't tried yet. Will do and see what happens.

Message 459 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@TimChangsorry I didn't get to testing yesterday as I had emergency issues at the office that needed tending. I started testing this morning to see if I can reproduce the IPv4 blocking issues and now I cannot. I've now enabled QoS and Auto-Enabled congestion control and I'm not seeing any blocking issues.

 

IPv6 testing site shows I have dual stack working and both IPv4 and IPv6 traffic is running fine. I don't know if this information is of value for the testing, but this showed up in the logs.

 

[DumaOS] config write 'com.netdumasoftware.qos.settings', Sunday, January 31, 2021 01:20:07
[DumaOS] config write 'com.netdumasoftware.qos.settings', Sunday, January 31, 2021 01:19:56
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] applying qos for zone lan, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' now bound, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] config write 'com.netdumasoftware.devicemanager.dpisettings', Sunday, January 31, 2021 01:16:13
[DumaOS] Backing up settings to config partition., Sunday, January 31, 2021 01:16:13
[DumaOS] Cloudsync DPI result 'nil','failed to sync', Sunday, January 31, 2021 01:16:13
[DumaOS] Cloudsync DPI 'skipping mirror', Sunday, January 31, 2021 01:16:13
[DumaOS] Cloudsync DPI 'HTTP sync failed', Sunday, January 31, 2021 01:16:13
[DumaOS] HTTP download failed with code '404', Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' now bound, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] Ubus object 'com.netdumasoftware.dpiclass' added, attempting to bind pending, Sunday, January 31, 2021 01:16:13
[DumaOS] applying qos for zone wan, Sunday, January 31, 2021 01:16:13
[DumaOS] NSS delete root for interface 'br0', Sunday, January 31, 2021 01:16:11
[DumaOS] applying qos for zone lan, Sunday, January 31, 2021 01:16:11
[DumaOS] NSS delete root for interface 'brwan', Sunday, January 31, 2021 01:16:10
[DumaOS] applying qos for zone wan, Sunday, January 31, 2021 01:16:10
[DumaOS] config write 'com.netdumasoftware.qos.settings', Sunday, January 31, 2021 01:16:10
[DumaOS] Using disabled(NOP) QoS subclass, Sunday, January 31, 2021 01:16:10
[admin login] from source 10.3.2.100, Sunday, January 31, 2021 01:15:42
[USB device attached] The USB storage device (FEDORA-WS-D) is attached to the router, Sunday, January 31, 2021 01:15:26

I'm not too sure why http download of the cloud sync failed. It's possible that my pi-hole did a dns sinkhole on something but I didn't see anything obvious in my pi-hole logs to suggest that happened. I also did save the debug logs from when I turned on QoS. It's in the same dropbox link I sent you previously.

 

I'll continue to run with this configuration but this firmware seems extremely stable to me. My LAN connections doesn't show any port resets when WAN DHCP renews that I previously reported on previous firmware. The only thing I didn't get working was the OpenVPN server when I was in the office yesterday. For some reason I wasn't getting an IP address from the router. But it could be possible this is because I haven't downloaded/updated my configuration on the OpenVPN client on my office computer. I'm not in the office frequently, only once every two weeks, but I don't think it's a showstopper function at this point.

 

For the days I've been running the firmware has been extremely stable. WiFi issues. IPTV works as smoothly as before. This version has my vote as a beta test candidate for others to try.

Message 460 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

Cosmetic bug. I think Network Snapshot and Network Overview only monitors IPv4 traffic and is ignorant to IPv6 traffic.I should see significant more traffic from devices on my network since I'm dual stack.

Message 461 of 769
Blancopomona
Aspirant

Re: New Firmware v2.3.2.108 (XR500)

How do I delete firmware
Model: XR500|Nighthawk Pro Gaming Router
Message 462 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@tekonsite I agree 100 percent

Message 463 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

@gisuck regarding cloud sync that can sometimes happen but isn't usually an indication of an issue, if you manually flush/sync the cloud it should work it will connect at some point to sync. Are devices using more traffic than is showed? Just because you're dual stack doesn't mean bandwidth is being arbitrarily used.

@Blancopomona you can't delete firmware, do you mean downgrade/go back to pre-beta firmware? If so just download a pre-beta firmware file and downgrade to it in the same way you upgraded to the beta.
Message 464 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)


@Netduma-Fraser wrote:
@gisuck[...] Are devices using more traffic than is showed? Just because you're dual stack doesn't mean bandwidth is being arbitrarily used.

Oh yeah. It's not even registering IPTV traffic even though it's HD/4K content which also connects to Netflix, YouTube, etc. Most of the time the graph is idle which should not be, with the number of active devices I have on my home network. The only reason why I suspect it's IPv6 problem is because if I disable IPv6 and reboot, I seemingly get a more accurate reading on the graph. Doesn't mean it is, just sus (like Among Us).

Message 465 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

Just an example of what I'm seeing. https://imgur.com/a/MVkN3BO  And I'm streaming YouTube content on Thorium. should see spikes to at least 4MB/s

Message 466 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Thanks for the report @gisuck I'll get one of my colleagues to test this out and see if they see the same thing.
Message 467 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@Netduma-Fraser I confirm the problems with not showing the number of downloaded mb, ipv6 turned off for me, today there were problems with qos it turned off by itself, iptv cuts every few seconds, traffic prioritization does not detect youtub and some other pc games and applications asus tuf, manual setting works, connection tests it's very low, 114 is terrible turning off qos doesn't help

Message 468 of 769
Delx
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

I Have updated to 114 firmware and see how it goes.

 

What is the best way to reset the router after update? using a pin?

also is it ok to restore the backup settings after reset?

Message 469 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

@Raf1212 did you do a factory reset after upgrading?
@Delx it's up to you but I'd suggest from the interface usually and reserve the button if you don't have access to the interface. I wouldn't recommend restoring a config from a previous version as it could cause issues.
Message 470 of 769
Hydros85
Guide

Re: New Firmware v2.3.2.108 (XR500)

if i  click reserve the button  QOS settings are not reset traffic prioritization  remains the same as before reset, weird  probably better to reset with the button on the back

Message 471 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Sorry @Hydros85 what button are you pressing exactly? DumaOS Classified Games is enabled by default if that is what you're referring to.
Message 472 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

Cosmetic bug: The "traffic overview" in QoS isn't able to record background upload traffic. https://imgur.com/a/4zeHFum

 

Message 473 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

 @Netduma-Fraser yes of course; now it works, I will watch start debugging, weird now it works fine, I had two times so I had that, xr500 loses stability for a few minutes, it seems that it was just android smart tv sony, iptv started to clip and all qos functions turned off with the message, after a while I returned to the qos website and it was already on, it was strange, other devices worked fine

Message 474 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Good find @gisuck I'll get the team to have a look.

@Raf1212 okay keep us posted!
Message 475 of 769
Announcements

Orbi WiFi 7