× Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
Orbi WiFi 7 RBE973
Reply

Re: New Firmware v2.3.2.108 (XR500)

Hydros85
Guide

Re: New Firmware v2.3.2.108 (XR500)

when i hit Erase in backup settings,not all settings go back to the original settings.

And in dumaos ver 3.0 114 build upnp does not show the ports used by playstation 5 and in call of duty have strict nat, but on the original version 2.3.2.66 upnp show ports and i have open nat , also in 3.0 114 when i set dmz server on my ps5 yes i have open nat but also lost packet where i never had

Message 476 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Thanks for posting, I'd advise performing a full factory reset after upgrading, this ensures you clear out any low-level code that could be having an effect. Please try this and let me know how you get on.

Message 477 of 769
minino
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

I have reboots again with 114, how can I clean the system so that it does not crash? Xr500
Message 478 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@Netduma-Liam I do not know if it will help but I restored the factory settings, and I still had the same settings in the allocation of bandwidth, and only here, another dish was deleted

Message 479 of 769
Martdog23
Guide

Re: New Firmware v2.3.2.108 (XR500)

hello all, have been updating the firmware accordingly just like everyine else and am having the same issues somewhat. My traffic prioritization does not load at all, the QOS will load along with bandwith allocation but no traffic prioritization to select devices. Also, when i load the dumaos app i noticed the high priority traffic light would go in and out signaling if high priority traffic was detected. Has anyones dealt with these issues?

Model: XR500|Nighthawk Pro Gaming Router
Message 480 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Did you just upgrade to 114? Did you perform a factory reset after the upgrade?

Message 481 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

OK, how did you perform the reset, was it through the GUI or using the physical pin on the back?

Message 482 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

Are you getting an error when you try to load QoS? If so, what is it?

Is your mobile device priotised at all in QoS? It may just be detecting that and determining it as high priority traffic.

Message 483 of 769
gisuck
Apprentice

Re: New Firmware v2.3.2.108 (XR500)


@Martdog23 wrote:

hello all, have been updating the firmware accordingly just like everyine else and am having the same issues somewhat. My traffic prioritization does not load at all, the QOS will load along with bandwith allocation but no traffic prioritization to select devices. Also, when i load the dumaos app i noticed the high priority traffic light would go in and out signaling if high priority traffic was detected. Has anyones dealt with these issues?


There seems to be a trend where after loading .114 firmware, things in the QoS is broken after .114 first boots on install. The fix seems like disabling QoS, rebooting, then enabling fixes the problem. Just comparing notes to what others are seeing, including myself who saw similar issues.

Message 484 of 769
Martdog23
Guide

Re: New Firmware v2.3.2.108 (XR500)

I did just update to .114 from .108...did factory reset thru the GUI and the pin in the back, multiple times each. I even tried to redownload the file to see if that would work. The QOSwill load but it for some reason cannot pick up traffic prioritization or recognize if there is high priority traffic.
Model: XR500|Nighthawk Pro Gaming Router
Message 485 of 769
Martdog23
Guide

Re: New Firmware v2.3.2.108 (XR500)

So i turned off QOS and rebooted the router, turned QOS back on and still the traffic prioritization is not showing up. @gisuck 

Model: XR500|Nighthawk Pro Gaming Router
Message 486 of 769
Martdog23
Guide

Re: New Firmware v2.3.2.108 (XR500)

the error message i receive is 'device not found'

Model: XR500|Nighthawk Pro Gaming Router
Message 487 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

I have restored the factory settings again and confirm that I do not remove devices or prioritization added manually to devices, and with the flower of prioritization, the browser data has been deleted earlier

 

first reset gui, and the second pin on the back, nothing helps,

Message 488 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@Netduma-Fraser @Netduma-Liam

I have restored the factory settings again and confirm that I do not remove devices or prioritization added manually to devices, and with the flower of prioritization, the browser data has been deleted earlier

 

first reset gui, and the second pin on the back, nothing helps,

 

same message as all users the device was not found

Message 489 of 769
Raf1212
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

@Netduma-Fraser @Netduma-Liam I forgot to add that devices that were removed are no longer displayed as those from before restoring factory settings, most of them were displayed as playstation

Message 490 of 769
minino
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

any configuration tips to improve hit detection in apex legends pc? I have 70-70 qos with 600mb, apex legends high priority traffic, geofilter on london server. upnp disabled because it doesn't work right.

Model: XR500|Nighthawk Pro Gaming Router
Message 491 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

OK so it's maintaining some configuration even after a factory reset? Thanks for letting us know, we're looking into this!

Message 492 of 769
Netduma-Liam
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

What results do you get if you perform a connection benchmark? This will help us check if QoS is working correctly. 

Message 493 of 769
Martdog23
Guide

Re: New Firmware v2.3.2.108 (XR500)

the connection benchmark has not worked properly for me since i downloaded the beta firmware for xr500. I have a r2 as well and its benchmark takes me all the way down to 1% on recommended qos. xfinity modem/router combo i put in bridge mode for router.

Model: XR500|Nighthawk Pro Gaming Router
Message 494 of 769
ep2015
Apprentice

Re: New Firmware v2.3.2.108 (XR500)


@Netduma-Fraser wrote:
@ep2015Let us know if it happens again and what is happening on the network at the time please.

@crmontoy1https://ntgr-my.sharepoint.com/:u:/g/personal/tichang_netgear_com/Ecek7S3fUjZHmGi11s60rNQB1eZUv5HHh-...

Currently noticing 100% spikes again for the last several days. My logs are showing a lot of DoS Attack and "Lan access from remote" entries. 

 

My speeds seem normal and it doesn't seem to be impacting much, but I did get a message from my Synology NAS sayng that an outside IP address is now blocked for making too many unsuccessful attempts to access it.  

 

I'm slightly more concerened now that the NAS is also sending red flags

Message 495 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

@Martdog23 I've let a colleague know so they can test that again.
@ep2015 What is the IP shown in the log entries?
Message 496 of 769
ep2015
Apprentice

Re: New Firmware v2.3.2.108 (XR500)


@Netduma-Fraser wrote:
@ep2015What is the IP shown in the log entries?

All kinds:

 

145.239.205.207

34.78.227.165

67.248.212.198

188.166.87.22

72.21.81.200

46.4.17.145

96.114.14.140

52.205.139.14

130.211.16.53

 

It just keeps going. Some of the DoS Attacks will usually have the same IP listed for five or six entries, but many will have different ones per entry. The "Lan access from remote" seem to always be different. 

Message 497 of 769
tekonsite
Apprentice

Re: New Firmware v2.3.2.108 (XR500)

One thing I have noticed is many people on this forum use upnp. This is a huge security risk due to port scans seeing open ports on your firewall. Best practice is to turn off upnp.
Message 498 of 769
Netduma-Fraser
NetDuma Partner

Re: New Firmware v2.3.2.108 (XR500)

They all seem fine, nothing suspicious, just same game servers and connections you've likely made by web browsing.
Message 499 of 769
ep2015
Apprentice

Re: New Firmware v2.3.2.108 (XR500)


@Netduma-Fraser wrote:
They all seem fine, nothing suspicious, just same game servers and connections you've likely made by web browsing.

Does the fact that my CPU locks at 100% when these events show up in the log warrant any concern? 

Message 500 of 769
Announcements

Orbi WiFi 7