New Firmware v2.3.2.108 (XR500)

[Fubar__]

I put back the old .108 duma os 3.0 firmware.
Hope to get an answer soon

[Vicious_Results]

How do you put it back on 108

[tekonsite]

@Netduma-Fraser
You may need to make a new thread called New Firmware 3.0 beta v2.3.2.114 (XR500) to avoid the mass confusion coming your way lol!

[Fubar__]

See last post from frasier (page 22) for the correct .114 version i believe

(answer to you question I still had the download files from .108)

[Fubar__]

One more thing I need to mention, I still forgot to post it : )

In the  old duma os 2.0 I have used the only power light seting.

Since the 3.0 update the 3 options for lights don't change anything for the lights.

Maybe that is fixed with the .114 update, I have to check.

[Netduma-Fraser]

Let us know and if it doesn't work I can pass that onto Tim.

[rounder]

Seems that 2.3.2.114 link is ok now, i disabled  auto update.

@Netduma-Fraser One question, what does WAN or no wan means when settign up traffic prio - Gaming / Voice (WAN)

Link to proper .114 dumav3

https://ntgr-my.sharepoint.com/:u:/g/personal/tichang_netgear_com/Efl1sXj2vwFFhT1S3HbG-t8BNO2PcYWB6Y...

[Netduma-Fraser]

Here is a description from a dev on Apply to WAN:
Apply to WAN is an experimental feature which we haven't done a lot of testing on. In future we may decide to enable it by default if we can prove that it works and that it has no compatibility issues. Essentially it applies the same priority information tags to packets going out to the ISP. The ISP may just ignore these tags, but you may see a performance improvement through using these tags.

[Vicious_Results]

To be clear there is a new 114 update that includes the 3.0 improvements? I don’t want to update to 114 again and lose the 3.0 add on’s like ping heat map.

[Fubar__]

The light settings still don't work for me. Only power light is on and all 3 options dont change a thing.

[Fubar__]

Yes. the one in he last post from Frasier is .114 with Duma OS 3.0 functions

[Netduma-Fraser]

Originally .114 which can be found at the link above was the only firmware of that name, and that is the 3.0 version. The one the router upgraded to and the one available on the support site has for some reason been given the same firmware version but that does not include 3.0. Make sure you factory reset @Fubar__

[Vicious_Results]

Thanks I will wait about an hour to see some feed back from users on stability of it. Please feel free to post how it’s working for you if you have any feed back.

[Delx]

@TimChang Did you manage to review the log file I sent? I am still have connection issues with 2.4ghz aswell and they seem worse with 114 update

[Fubar__]

I did a factory reset as allways. Lights dont work.

[Netduma-Fraser]

@Fubar__ did you turn the lights off via the hardware switch?

[Fubar__]

Hahaha, so stupid did not even remembered there was a switch on the back : )

[toreter]

Hello there.

I have v 2.3.2.108 and seems to work fine BUT pingheat map crashes and after few days of having XR500 working seems to do not work anymore and get "It taking longer than expected. Wait a while before using this R-App" but it never works back again......what is it to do. Restart the router¿? Or is it another easier way to make it to work again¿?

[Netduma-Fraser]

I'd recommend upgrading to .114 which you can find here then do a factory reset and it should work better then https://bit.ly/39ZN5JT

[toreter]

I used this one instead:

https://ntgr-my.sharepoint.com/:u:/g/personal/tichang_netgear_com/Efl1sXj2vwFFhT1S3HbG-t8BNO2PcYWB6Y...

[sinean]

Nice, Just updated to 114 dumaos 3.0 , Ipv6 is working with QOS. Haven't tried anything else atm. Just thought I'd let you all know. on 108 ipv6 was broken with and without QOS enabled.

Network Map is Accurate for me as well. It had a few devices showing offline when that was not the case in 108

Network Ping went from a B to an A+

[V1Z10N]

@Netduma-Fraser 

When i got the auto update with the .114 product firmware,i lost all the 3.0 features but my DHCP issues were fixed,i had DHCP issues with .108, only devices that used my wifi like my smartphones and tablets etc. would disconnect at random times,when i did the auto update to .114 without the 3.0 features,i never disconnect at all over a period of 48 hours,now that i upgraded to .114 with 3.0 features it appears the DHCP issues have returned,i get disconnected at random times from my wifi connection,i managed to bypass this in previous firmware by assigning all wired devices with a static IP but smart devices still disconnected,please inform the tech team about the DHCP issues and hopefully yall can get it sorted and working similarly to the product firmware.I love all the 3.0 features,keep up the great work,i know we still got a long way to go but you guys will knock it out the park once we get to the final build firmware.

[sinean]

Yea , the auto-update is not the 114 beta dumaos but an official firmware.

Download 114 in the above link, that is the correct version.

I did the same thing as you did earlier by auto updating.

I haven't had any disconnects on either 108 or 114. I'm not sure why you are having the issue.

[V1Z10N]

I just switched off my router for an hour and now it works,the old off / on tactic,hahaha

[Netduma-Fraser]

Great to hear that @sinean, thanks for the feedback! Glad to hear that @V1Z10N you may want to do a factory reset now you're back up to the .114 beta but if everything is working currently no need to