New Firmware v2.3.2.120 (XR450)

[Netduma_Alex]

Hi all,

Thanks for your patience, we’ve got a new firmware for you to test.

Highlights of this update:

• Big improvements to IPv6 compatibility
• Improvements to general stability
• System-wide GUI improvements
• Updates to game and device detection
• Fixed DHCP renewal causing internet to drop

I would highly recommend you do a factory reset after upgrading for the freshest installation.

Firmware: https://www.dropbox.com/s/p0ohpkiz45dpt2g/XR450-V2.3.2.120.zip?dl=0

[FURRYe38]

Thank you. Will get it loaded and start testing. 

[dewayne221]

I dont think congestion control is working with ipv6 on

[Netduma-Liam]

How have you come across this? What differences are you seeing that suggests IPv6 is causing an issue with QoS?

[dewayne221]

I was testing ping with cmd and it shoots up to like 300 while under load with ipv6 on with it off it still shoots up but not as bad like 80 some

[Netduma-Fraser]

What QoS settings were you using while doing this test?

[dewayne221]

Qos was on always i even put the sliders at like 50 percent also the speed test on the router give me A+ on the first 2 and a D on the  ping under load test

[Netduma-Fraser]

Did you do a factory reset after you upgraded the firmware?

[dewayne221]

---

@Netduma-Fraser wrote:
Did you do a factory reset after you upgraded the firmware?

---

yes

[Netduma-Liam]

How did you perform the factory reset, through the interface or via the pin on the back of the router?

[dewayne221]

---

@Netduma-Liam wrote:

How did you perform the factory reset, through the interface or via the pin on the back of the router?

---

Both i did interface first on old build and pin on new build

[Netduma-Fraser]

Could you try factory resetting from routerlogin.net/adv_index.htm please as I'm not sure the other methods are resetting correctly, then try please.

[Retired_Member]

what are the new features on this build id like to know

[Netduma-Fraser]

@Retired_Member there are no new features over the other beta builds, just what is mentioned on the first post.

[Retired_Member]

i found an issue with the xr450 beta update it tries to connect but it immediately disconnects the wifi on some devices so i had to downgrade to the non beta update

[Netduma-Fraser]

Did you do a factory reset after upgrading? If not I would highly suggest doing so as it prevents issues carrying over

[Retired_Member]

Ohh ok I keep forgetting but the last update I. Never had that issue

[Netduma-Fraser]

It won't always happen but depending on what gets changed between the versions, old level code from a previous version can cause issues. Re-upgrade then factory reset and see if you get the same issue please.

[dewayne221]

---

@Netduma-Fraser wrote:
Could you try factory resetting from routerlogin.net/adv_index.htm please as I'm not sure the other methods are resetting correctly, then try please.

---

I tried that same issue

[Retired_Member]

It worked over here

[Netduma-Fraser]

Okay thank you both, this is something we'll really need to try and reproduce ourselves, will get back to you if I get a good workaround.

[dewayne221]

---

@Netduma-Fraser wrote:
Okay thank you both, this is something we'll really need to try and reproduce ourselves, will get back to you if I get a good workaround.

---

i meant i was still having the ping under load issue still

[Netduma-Fraser]

@dewayne221 oh I see, did the factory reset using that page wipe everything successfully for you then?

[dewayne221]

---

@Netduma-Fraser wrote:
@dewayne221oh I see, did the factory reset using that page wipe everything successfully for you then?

---

mostly i think my internet speeds stayed

[Netduma-Liam]

Where did you see that they remained the same? Did you not set this when going through the initial setup?