Reply

Re: XR450 Firmware 2.3.2.114

DredPirate13
Apprentice

XR450 Firmware 2.3.2.114

@Netduma-Fraser I noticed this 114 update set as an automatic update on my XR450. Is this still part of the beta or is this another needed update like 2.3.2.66?

Message 1 of 22

Accepted Solutions
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

So as far as I can tell there is a pre-DumaOS 3.0 update with security updates that has unfortunately been named the same as the .114 DumaOS beta version. As it is a 'stable' release anyone who had auto update enabled would get upgraded to that version automatically. You by no means need to stay on that firmware and can upgrade back to the 3.0 version.

View solution in original post

Message 9 of 22

All Replies
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

I wasn't aware that an update was being pushed automatically. .114 was a beta build but I've had some reports it doesn't include beta features so I'm double checking with the team to see if it was:
a) Pushed without 3.0 features to fix DHCP issues or
b) Its an update to the beta build and something has gone wrong so it's not showing features.
Message 2 of 22
DredPirate13
Apprentice

Re: XR450 Firmware 2.3.2.114

Ok, I really appreciate that. I will wait to hear back from you before I do anything. 

Message 3 of 22
Vicious_Results
Aspirant

Re: XR450 Firmware 2.3.2.114


@Netduma-Fraser wrote:
I wasn't aware that an update was being pushed automatically. .114 was a beta build but I've had some reports it doesn't include beta features so I'm double checking with the team to see if it was:
a) Pushed without 3.0 features to fix DHCP issues or
b) Its an update to the beta build and something has gone wrong so it's not showing features.

 

How do we get back to 2.3.2.108?


 

Model: XR500|Nighthawk Pro Gaming Router
Message 4 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

Message 5 of 22

Re: XR450 Firmware 2.3.2.114

I updated and DID NOT LIKE the update. rolled it back to the previous.

Took away QOS and all settings

Message 6 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

Message 7 of 22
DredPirate13
Apprentice

Re: XR450 Firmware 2.3.2.114

@Netduma-Fraser Is this something that should be ignored then?

Message 8 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

So as far as I can tell there is a pre-DumaOS 3.0 update with security updates that has unfortunately been named the same as the .114 DumaOS beta version. As it is a 'stable' release anyone who had auto update enabled would get upgraded to that version automatically. You by no means need to stay on that firmware and can upgrade back to the 3.0 version.
Message 9 of 22
DredPirate13
Apprentice

Re: XR450 Firmware 2.3.2.114

Thank you, I will have to check it out. My XR450 is on auto-update so I am surprised it didn't already do it. 

Message 10 of 22
DredPirate13
Apprentice

Re: XR450 Firmware 2.3.2.114

I updated the automatic 114 update and it seems like nothing has changed and everything is working as usual. 

Message 11 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

You still have the DumaOS 3.0 features after the auto update?
Message 12 of 22
-JK-
Star

Re: XR450 Firmware 2.3.2.114

I have gone back to v2.3.2.108 as the 114 didn’t include ping assist, connection benchmark & traffic control... also geo filter is super basic on 114... I’m not sure if this is temporary or what but until I hear / read otherwise why would I go to new firmware which is worse than before??
Message 13 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

@-JK- you had auto update on so it updated to the pre-beta .114 firmware that has just released. You can re-upgrade to the beta .114 version available here: https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/New-Firmware-v2-3-2-108-XR500/m-p/2...
Message 14 of 22
-JK-
Star

Re: XR450 Firmware 2.3.2.114

You’ve lost me... all that does is take me to a thread. I’ve got v2.3.2.108 installed and running. Why update to 114 when it has loads of features that I use missing?
Model: XR500|Nighthawk Pro Gaming Router
Message 15 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

It was a link to a comment by TimChang providing a firmware link. I've just noticed you're on the 450 though so doesn't apply. Basically there are two .114 versions:
Pre-beta (recently released - automatically upgraded to)
DumaOS 3.0 beta (recently released - not automatically upgraded to)
I was providing a link to the beta one but as you're on 450 you can't use that currently.
Message 16 of 22
-JK-
Star

Re: XR500 Firmware 2.3.2.114

@Netduma-Fraser I’m on xr500 pal.
Model: XR500|Nighthawk Pro Gaming Router
Message 17 of 22
FURRYe38
Guru

Re: XR500 Firmware 2.3.2.114

Please post here in the v108 XR500 thread if you have the XR500:

https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/New-Firmware-v2-3-2-108-XR500/td-p/...

 

This thread was made for the question about v114 being seen on the XR450

 

We presumed that you had posted in regards to the XR450 since you didn't mention actually having a different model.

 

Thank you.


@-JK- wrote:
I’m on xr500 pal.

 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RBK752(v.5) | Switches NG GS105/8 and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 18 of 22
showtyme
Aspirant

Re: XR450 Firmware 2.3.2.114

So with the update we lost the ping heat map on the xr450, will it be coming back? that was an amazing feature on the xr450.

Message 19 of 22
Netduma-Fraser
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

That was a security update which is based on pre-beta DumaOS - you would need to reupgrade to the current XR450 beta: https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/New-Firmware-v2-3-2-108-XR450/td-p/...
Message 20 of 22
toreter
Star

Re: XR450 Firmware 2.3.2.114

I have a question not specific for .114 but could be useful for all.

I  connect to my router via mobile phone using Safari ( IOS) and it is absolutly impossible to use any feature regarding DUMA tools.(ping, filtering....)

Will it be any possible fix about this¿? I have also downloaded Nighthawk App but there is no DUMA features available.
I am using XR500

Message 21 of 22
Netduma-Liam
NetDuma Partner

Re: XR450 Firmware 2.3.2.114

We do currently have a DumaOS app available on the App store, but it's currently in beta so you may find some bugs!

Message 22 of 22
Discussion stats
  • 21 replies
  • 5389 views
  • 1 kudo
  • 9 in conversation
Announcements

Orbi WiFi 6E