Reply
Highlighted
Guide

Division 2 not connecting?

I have two ps4s on the same network. They both work fine with every game except the division 2. One of the PS4s works fine with several connection types(wired to modem, wired to XR500 wireless) but the other ps4 gets stuck at the menu with the MIKE-1 error code, regardless of what connection type I try. Has anyone else experienced this? I suspect there is a port forwarding trick that prevents the error but I have not tried much of it. Thanks in advance!
Model: XR500|Nighthawk Pro Gaming Router
Message 1 of 9

Accepted Solutions
Highlighted
Guide

Re: Division 2 not connecting?

Hey everyone! The issue was the date being wrong on the ps4! I hope this info can help someone else.

View solution in original post

Message 8 of 9

All Replies
Highlighted
NetDuma Partner

Re: Division 2 not connecting?

Have you got the Geo-Filter enabled for this game? If so then that is probably why. Disable the Geo-Filter and see if it works correctly. Our testing so far is showing that it may not be Geo-Filterable though we're still looking into it.
Message 2 of 9
Highlighted
Guide

Re: Division 2 not connecting?

Thanks for the response.

 

However, I do not have the Geo-Filter on. Do you have any other suggestions?

Model: XR500|Nighthawk Pro Gaming Router
Message 3 of 9
Highlighted
Guru

Re: Division 2 not connecting?

What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?

 

Try setting the NAT Filter to OPEN if you have two consoles online plaing the same game at the the same time.


My Setup (Cable 900Mbps/50Mbps)>CAX80>XR450 v2.3.2.106(Router Mode)>RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P,
EX7500/EX7700, XR450 and WNHDE111
Message 4 of 9
Highlighted
NetDuma Partner

Re: Division 2 not connecting?

According to online that error is usually caused by the game undergoing maintenance. Although a potential solution was a hard turn off of the console by holding down the power button until it turns off. Then unplug from the power for 30seconds and try again.
Message 5 of 9
Highlighted
Guide

Re: Division 2 not connecting?

I tried it with my old router and it still does not work. I think I can rule out that the router is not the issue.
Message 6 of 9
Highlighted
NetDuma Partner

Re: Division 2 not connecting?

Thanks for letting us know. Best of luck getting it fixed.

Message 7 of 9
Highlighted
Guide

Re: Division 2 not connecting?

Hey everyone! The issue was the date being wrong on the ps4! I hope this info can help someone else.

View solution in original post

Message 8 of 9
Highlighted
Guru

Re: Division 2 not connecting?

Enjoy. 


My Setup (Cable 900Mbps/50Mbps)>CAX80>XR450 v2.3.2.106(Router Mode)>RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P,
EX7500/EX7700, XR450 and WNHDE111
Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 1957 views
  • 1 kudo
  • 4 in conversation
Announcements