NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
IPV6 not working on XR1000
Ok so here we go. 1. Model does not show in model for topic. 2. I have owned the following: orginal NETDUMA, XR500 and now the XR1000. 3. My XR500 IPV6 worked fine. 4. IPV6 will not work rega...
Decided to try some troubleshooting.
1. Firmware was lastest version 38. I also tried 36. Both did not work.
2. Rebooted modem, update PC to include windows. On 38 and 36 Did not work.
3. Tried setup wizard on 38 and 36. It also detected DHCP, but still did not work.
Tried Auto config, dhcp and auto detect in firmware 38 and 36. Did not work.
When I look on the IPVS page it is showing DHCP addresses under WAN and LAN. But still does not work.
Fraser was talking about your physical setup: Modem (CM1000) -> XR1000 -> Connected Devices.
The latest version for the XR1000 is 1.0.0.52, I'd suggest upgrading to this and performing a factory reset after the upgrade.
https://www.netgear.com/support/product/xr1000#Firmware%20Version%201.0.0.52
https://www.downloads.netgear.com/files/GDC/XR1000/XR1000-V1.0.0.52_1.0.38.zip
This is why I put 38.
- Thanks for the information so far. Can you take a look at the Device Manager please and see if the Xbox gets a local IPv6 address there?
It does not
- That's not going to work. I have the latest and it still doesn't work.
