Neuste Firmware Problem Nighthawk XR 500 Geo Filter

[David2027]

@Netduma-Fraser 

Cant Upload a Txt, just jpg,gif,png and pdf?

other options to upload a txt here?

[Netduma-Fraser]

@David2027 paste the contents into pastebin.com and post the link here, set it to expire after a few hours.

[David2027]

@Netduma-Fraser 

https://pastebin.com/s3EE3PtX

[Netduma-Fraser]

I think you've made it private so I can't view it

[David2027]

Yeah sorry, i changed it to public, now it should work

[Netduma-Fraser]

Yeah it looks like the DHCP lease. Give your devices static IPs in LAN settings and if applicable give the XR a static IP on the ISP modem/router.

[David2027]

How to give the XR static Ip, my modem runs in full bridge mode with ip 192.168.1.1 then my XR with 192.168.1.2

[Netduma-Fraser]

What is your modem model? On that page you provided a picture of give your devices static/reserved IP addresses.

[David2027]

@Netduma-Fraser 

My Modem Model is Drytek Vigor 165

I got again Disconnect every Day the Same...

Please can you take a look again at the new protokol ?

 https://pastebin.com/8KmJi4p4

[David2027]

Okay you mean to give there a static ip to the modem or xr500 or both?

On the list down below of the screenshot?

@Netduma-Fraser 

[Netduma-Fraser]

Okay so it is a router, have you put the XR in the DMZ on the Draytek? Set a static IP for the XR on the Draytek

[David2027]

No, its a Modem, draytek vigor runs in full bridge mode, there are no options to do that!?!

[David2027]

No, its a Modem, draytek vigor runs in full bridge mode, there are no options to do that!?!

Do you saw the new protokol from yesterday?
@Netduma-Fraser

[Netduma-Fraser]

It's a router so you should be able to take it out of bridge mode, then apply a static IP to the XR and put it in the DMZ instead. Yes I did thanks for that.

[David2027]

But why should i do that, thout its better if i run it in bridge Mode, if the drytek is on router mode do i have a double nat?

[Netduma-Fraser]

Because if the issue is that the XR is getting a new WAN IP and not connecting properly then this would fix that. The DMZ feature I mentioned would prevent a double NAT.

[David2027]

Happy New Year, all the best for your family and you!

Ok and the XR is still DHCP Server or the Drytek?

@Netduma-Fraser

[Netduma-Fraser]

Thank you, Happy New Year to you and yours as well!

Both still using DHCP yes, just give the XR a static IP on the Draytek.

[David2027]

Thank you!

Yeah but can not be both DHCP Server, in one i have to unable, it just can be one dhcp server, you know what i mean?

[Netduma-Fraser]

Both can be a DHCP server, I assure you, that's how I have mine setup - ISP router (DHCP +XR500 static IP + in DMZ) > XR500 (DHCP)

[David2027]

Ok nice Thank you,

I gone change my Setup now from bridge to Router, will let you know when iam finish

[David2027]

First Ip Conflict because both dhcp server and know i reset the xr500 know he cant find any internet conection when i start installing again, everything is right conected and drytek is on

[Netduma-Fraser]

Two DHCP servers won't cause a conflict, one will be giving out IPs to devices in the 192.168.0.X range for example, the other in 192.168.1.x so no issues there. Did you set the same IP it already had as static?

[David2027]

Yeahh i fixed it, took some time before i came behind that thats the mistake was... I will Check Now, hope nomore disconnects , will let you know, thank you so much for everything so far!

[David2027]

@Netduma-Fraser 

My Connection Crashed Again today, Telekom (iSP) was here and they said that is because of my Network, its not because of them, they checked everything outside.

Again because of Lease?

https://pastebin.com/Ps6xju8X

How do i find out, is it from the XR or Drytek?