× Introducing the Orbi 970 Series Mesh System with WiFi 7 technology. For more information visit the NETGEAR Press Room.
Orbi WiFi 7 RBE973

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Netduma-Liam
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

¿Es esto con QoS habilitado? ¿Dónde está midiendo sus velocidades, en Connection Benchmark o utilizando la prueba de velocidad de terceros?

Message 26 of 113
Netduma-Liam
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

@PSPatricko I can't see your image yet as it's not been moderated. Are you measuring these speeds through Connection Benchmark or a third-party speedtest? Can you run both and compare the results?

Message 27 of 113
PSPatricko
Aspirant

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Everything was on the image, results from speedtest.net and directly from router. On Speedtest.net I'm getting full speed results and in router they are much lower.
Message 28 of 113
aaronibm21
Luminary

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

tienes puesto el xr500 como bridge , o como router?? 

 

es decir, lo has conectado al router de la compañia por la boca 1 del router original??? 

 

o bien, has quitado el de la compañia y has puesto el xr500 como principal?? 

 

Model: XR500|Nighthawk Pro Gaming Router
Message 29 of 113
Netduma-Liam
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

@PSPatricko OK thanks for letting me know, that's likely just a case of Connection Benchmark not reporting your speeds properly, I believe we've now got a working patch for this so you can expect that in the next firwmare version. You can still set your speeds in QoS to be what you're actually getting and everything else should function normally for you.

 

Message 30 of 113
conkerick
Tutor

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I have been testing the update for two days now:

1) I don't know if the DHCP problem was solved. I have it disabled (as a precaution).

2) The router did not hang or reboot itself. In version .120 it crashed and restarted every 3-6 hours.

3) In version .114, which was more stable for me, the CPU load was constantly high, now it stay at "normal".

4) The UI loads noticeably faster and runs very smoothly.

5) Network monitor does not work, does not show any information.

It seems that we finally may be able to start enjoying our router.

Model: XR500|Nighthawk Pro Gaming Router
Message 31 of 113
ANGELsorry
Aspirant

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

im having alot of problem with mine did the update. and keep losin wifi and lan port wont work any fix ?

 

Message 32 of 113
ANGELsorry
Aspirant

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

need help my  x500 will stop workin wifi & lan port  i need to  factory reset every 5 or 6 hr cuz it will stop workin? i did the new update and having this problem any fix ?

Message 33 of 113
aaronibm21
Luminary

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

a mi me paso con los raps, no me cargaban , Fraiser me dio solucion, por otro lado cierto es, que me canso de reiniciar el router cada dia antes de ponerme a jugar porque si no ,no funciona Netduma!!!

 

 

Model: XR500|Nighthawk Pro Gaming Router
Message 34 of 113
Netduma-Liam
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

@ANGELsorry Please make sure you factory reset the XR after upgrading firmware. This is reccommended if you experience issues after an upgrade to ensure you're starting from a clean slate.

 

 

Message 35 of 113
FURRYe38
Guru

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Notice that the NH app can't connect remotely to the XR router from outside the local network:

IMG_0610.PNGIMG_0611.PNG

Any settings on the XR web page I can check on? 

Message 36 of 113
aaronibm21
Luminary

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Buenas tardes, con la ultima actualizacion , despues de haber restaurado de fabrica el router xr500 , cual seria la configuracion optima para poder jugar con mi ps5 en el Qos??? si lo pongo en automatico , la red de mi casa se viene abajo y no funcionan ni los dispositivos wifi. 

 

Gracias

Model: XR500|Nighthawk Pro Gaming Router
Message 37 of 113
FURRYe38
Guru

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

In inglese per favore


@aaronibm21 wrote:

Buenas tardes, con la ultima actualizacion , despues de haber restaurado de fabrica el router xr500 , cual seria la configuracion optima para poder jugar con mi ps5 en el Qos??? si lo pongo en automatico , la red de mi casa se viene abajo y no funcionan ni los dispositivos wifi. 

 

Gracias


 

Message 38 of 113
aaronibm21
Luminary

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Good afternoon, with the latest update, after having restored the xr500 router from the factory, what would be the optimal configuration to be able to play with my ps5 in Qos ??? If I put it on automatic, my home network breaks down and not even the Wi-Fi devices work.

 

Thanks

 

Model: XR500|Nighthawk Pro Gaming Router
Message 39 of 113
Netduma-Fraser
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

For remote connection, ensure that the XR is setup to get an Open NAT I.e if it is behind another router then that router is in modem/bridge mode or has the XR in the DMZ.
-
What do you mean automatic - auto setup? What settings do you have currently?
Message 40 of 113
FURRYe38
Guru

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I checked on this again locally and there is a Remote Management option under Admin. I was not enabled so I enabled it and set it to Everyone. Still can't connect remotely using the NH app. I presume there maybe a problem between the NH app and remote accesss in the FW. 


@FURRYe38 wrote:

Notice that the NH app can't connect remotely to the XR router from outside the local network:

IMG_0610.PNGIMG_0611.PNG

Any settings on the XR web page I can check on? 


 

Message 41 of 113
Netduma-Fraser
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Looks like it won’t be possible unfortunately based on the message you got there, you’ll have to be directly connected
Message 42 of 113
FURRYe38
Guru

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I'll see if I can find out if the app is supporting of remote access for XR routers...

Message 43 of 113
-Kevin_N
Tutor

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

Hi Netgear Support,

 

Do you know if there are any plans for future firmware upgrades to add the ability to define a DHCP lease duration time?

 

XR450, Firmware 2.3.2.130, OS Win 10 Home

 

-Kevin_N

 

 

Message 44 of 113
Retired_Member
Not applicable

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I'm also having issues with internet loss like every few hours I lose Internet even though my connection to the internet is still working because all the lights are blinking without orange the only way to temporarily fix Internet I have to restart the router
Model: XR500|Nighthawk Pro Gaming Router
Message 45 of 113
Netduma-Fraser
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

@-Kevin_N not that we have been made aware of at this time.

@Retired_Member set the DHCP starting range to .50 then give devices reserved IPs between .2 - .49, apply then reboot the router from the interface, wait 2 minutes and see if it is more stable after that.
Message 46 of 113
Retired_Member
Not applicable

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I have never done that before can you show me where to do that and how to do that
Model: XR500|Nighthawk Pro Gaming Router
Message 47 of 113
Netduma-Fraser
NetDuma Partner

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

@Retired_Member go to the LAN Settings page, change the DHCP starting number, then click on Add to do the reservations for devices
Message 48 of 113
FURRYe38
Guru

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

https://kb.netgear.com/24091/How-do-I-reserve-a-LAN-IP-address-on-my-Nighthawk-router?_ga=2.13950206...


@Retired_Member wrote:
I have never done that before can you show me where to do that and how to do that

 

Message 49 of 113

Re: New - XR450/XR500 Firmware Version 2.3.2.130 Released

I am having exactly the same issues! did you ever find a fix? 

Message 50 of 113
Discussion stats
Announcements

Orbi WiFi 7