XR 500 can't connect to server or DLAN over WIFI

[NukeBoom]

Hallo,

i have problem to access my plex server or dlan server or haxball server over WIFI.

Server is in Ethernet.

Can somebody helps me ?

Best Regrads

Nuke

[michaelkenward]

You have posted your message in the section of this community given over to Nighthawk WiFi Routers. (This is easily done, given Netgear's impenetrable community structure.)

You might get more help, and find earlier questions and answers about your hardware, in the appropriate section for your device. That's probably here:

Nighthawk Pro Gaming Routers - NETGEAR Communities

I will ask the Netgear moderator to move your message.

[Netduma-Fraser]

Try disabling QoS completely from the Anti-Bufferbloat menu and see if that helps at all.

[NukeBoom]

i have in QoS Never checked

[NukeBoom]

Where's the wireless isolation checkbox like on my old router?

[Netduma-Fraser]

I don't mean Never on the sliders, on Anti-Bufferbloat there is a 3 line option menu in the top left of the panel, click that and disable QoS entirely there. There isn't an option for that, if there was then enabling it wouldn't help with the issue.

[NukeBoom]

It disabled!!! I'm not dump. I read many website about this. And I have a new problem also. When I share a usb over internet. The max download from the usb is max 10bits. I connected over pppoe and vlan 35 0

[Netduma-Fraser]

In WAN Settings switch NAT to open and see if that helps. Is it a USB stick or a portable harddrive? A USB stick will not be very fast.

[NukeBoom]

It's a 256gb with up and down 400MB/s too slow ?

[NukeBoom]

It will be faster when we go private. I give you remote access to the router 😉

[Netduma-Fraser]

How are you sharing the USB storage over the internet exactly?

[NukeBoom]

Yes

[NukeBoom]

I test it with a other xr500 new one.

[Netduma-Fraser]

Okay let us know how you get on with the other router.

[NukeBoom]

I tested the New router xr500. I configrate only: QoS off. Set login and pw for inet. Vlan on 35 0. Ipv6 on auto detected. Can't connect to Server over wifi.

[NukeBoom]

Server configured with upnp.
Should I buy a asus router?
Usb Share is still on 10mbits update

[Netduma-Fraser]

Use port forwarding instead for the server and see if that allows access. It could be VLAN that is the issue also, if you have another router handle VLAN does it work?

[NukeBoom]

Hi. I set port forwarding manual on the xr500 for the Server. Still not working. I have one from sip and it works with upnp over wifi and lan.
Vlan is set for all. And could be, is not a professional answer. You don't have any idea, why this don't work.

[Netduma-Fraser]

That one works with the XR or WiFi/LAN? I am basing that off issues such as QoS not working well with VLAN so the optimization of VLAN and other features is not great. Hence why it could be the cause and I asked you for a way for us to either rule it out or confirm that is the problem. If I knew the exact reason immediately we wouldn't be in the troubleshooting stage.