My XR450 with firmware vertion 2.3.2.56 is having connection issues. My computer is connected using a eithernet connection and yesterday I was not able to connect to most web sites. I could connect to google and a few others but in general connections were not working. I unplugged the router and plugged it back in to do a power reset and then everything worked again. I could connect to any internet site as usual.
Today I connected to the router and was checking some settings. The router would not display the Network Monitor screen. So I power cycled the router again. All worked fine for a couple of hours. Now when I log into the router I get a spinning circle with the note: "Error: This R-App is not loaded yet, please try again in a minute."
Does anyone have any ideas on what I can do other than purchase a new router and throw this one away.
For the website issue change your DNS in Internet Setup and see if that helps. For Rapp not loading - go to System Information and in the Rapp panel options change the number of retries to 5 and reboot the router - see if that helps.
I have determined that the Router was overloaded. A new neighbor moved in near my house and was broadcasting on the 5Mhz freequency using the same channel 157 that I had set a couple of years ago. I did some research and found out that I could use my Apple Computer to do a scan of all the wireless devices in my neighboor hood. I found a channel that was not being used by anyone close and set the Router on that channel. The router is now back to normal and actually works again.
I still wonder why it couldn't handle some wifi interference and went into overload.
Also try turning down the power output of the RBRs wifi radios from 100% to 50% and see if this changes anything when you have wifi neighbors hear by. Under Advanced Tab/Advanced Settings/Wireless Settings
