NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
XR500 DHCP issue
I've had this router for 4 months now and it works fine most of the time. Once in a while I'll notice that some LAN devices become unresponsive, when I look into the issue it turns out that they have...
I'm having this same issue. Started after a few months of owning the router. I'm a streamer too, so having my router suddenly having these constant drops in the middle of a stream is incredibly annoying. I tried signing up for the beta, but I haven't heard back about it. Are they accepting anymore people?
Sorry to hear you're having this issue. Yes they will be sending more invites. The fix isn't in the beta build currently available but will be in a later one. People have found that downgrading to .32 or .40 seems to resolve the issue so perhaps try that. Please note you will miss out on some security fixes if you do that.
Hi all, I am having the same issue coudlnt get ip address for android devices after a few days and have to rester my router. When this happens also cannot access the router settings very well get "The operation is taking longer than expected. Please briefly wait before using this R-App."
Just bought this 2 weeks ago!!
- Please try the open beta and see if that helps with your issues https://community.netgear.com/t5/Nighthawk-Pro-Gaming-DumaOS-3-0/bd-p/en-home-beta-npg-duma
- Hi I tried this but now after 3 weeks the issue is back but worse. The router now crashes several times a day. Before I could still access the net via Ethernet but now it disconnects completely?
- I've thought of something new that might help. NG show a lot of false positives for attacks in the log, they may actually be blocking packets that are required and therefore cause disconnects. Could you try disabling the DoS protection in WAN Settings please?
- I ended up trashing the XR500 and buying an Asus RT-AX88U. Much more stable and has 8 LAN ports which is great because I'm thinking about setting up a NAS and can use link aggregation.
The stock firmware is better too. I will try that but not a very happy disabling Port Scan and DoS Protection!
- The router still has a firewall so you should be protected regardless. If that is the issue I can let NG know.
Well that has not worked either, now the wifi crashes while ethernet works fine and I cannot login to the router all i get it is This Rapp is not loaded yet, please try again in a minute. I have to hard reset.
Have Pm'd youy my log after hard reset.
- Unfortunately I don't have any more recommendations at the moment as it is a legitimate bug but I am talking to the NG team lead right now and he's discussing with the developer about it. Will get back to you as soon as I have any new information.
Probably the best bet is to try the beta or downgrade to a firmware that may be more stable for you. Any more updates on this, I am getting fed up of restarting the router several times a day and may just end up giving it back.
The beta resolved this issue for me. Where you able to get the beta installed? And, did you do a factory reset after you installed the beta?
Yup it workewd for about 2 weeks then same issues
- I'm talking with the NG lead at the moment regarding this, previously I was relying on others to pass the details on so hopefully I can work with him to try and get this sorted asap.
Just factory reset the router and still same problem
- The only thing I can suggest really is to use TFTP to upgrade then reset as that will give you the freshest install possible and hopefully mitigate any issues.
any further updates? it def is a RAM problem i think
- No updates at the moment, still trying to converse with NG on it.
- I am having the same issue now every day and it is frustrating. When will Netgear resolve this issue?
- I'm still working on that, have you tried any of the suggestions so far?
- I am going to try the new beta firmware. Has that been known to fix these dhcp issues or has that not been implemented yet? I am currently on the latest firmware .66. You mentioned that some customers have had success with .40 and .32 firmware. What do you recommend?
- The latest beta build we released just this last week I haven't seen many if any reports of disconnects so I'd start there first.
- I'm trying the latest beta right now. So far so good as it was a clean install. I also did a factory reset right after confirming install was successfull. I will keep you up to date.
- Looks like the same issue, as the internet was again out this morning at 6am. As soon as I power cycle the XR500 the internet is back up. Very frustrating and disappointed with this product and that it is a very expensive router. I expect the most basic functionality of DHCP to work correctly. There looks to be an issue when the lease expires. Please keep pushing developers to fix this. I have read some of the forums and this issue has been going on for over a year. Customers are going to get fed up with this and purchase products from other brands. Reliability is extremely important for your brand at Netgear. If word gets out to youtube influences and the media it will not be good for Netgear...
It really is ridiculous for a top of the line router.
I have found that disabling 5ghz wifi seems to improve the ram usage on the router with less crashes.
- Thanks for the information and sorry to hear it is still occurring. I've linked the entire topic to the XR500 lead so hopefully we'll make some headway. Set static/reserved IPs where you can for devices and the router itself as this may help.
