- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Confusing/conflicting technical specifications on the RAX75 specifications page...?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Confusing/conflicting technical specifications on the RAX75 specifications page...?
On the RAX75 technical specifications page (https://www.netgear.com/home/products/networking/wifi-routers/rax75.aspx)
Under the "WIFI TECHNOLOGY" section it says:
2.4GHz AX: 4x4 (Tx/Rx) 256 QAM 40MHz, up to 920Gbps
and then when you click "SHOW ALL TECH SPECS" and scroll down to the section "STANDARDS" it says
2.4GHz AX: 4x4 (Tx/Rx) 1024 QAM 40MHz, up to 1.2Gbps
Which is correct? Does anyone know?
Thanks!
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Confusing/conflicting technical specifications on the RAX75 specifications page...?
In case they make 920 Gb/s om 2.4 GHz I am going to take some 8-)))))
The RAX75 is a software-wise "scaled down" variant of the RAX80 - the 2.4 GHz AX interface is limited to 256 QAM, so "only" 0.92 Gb/s - and intended for specific sales channels like Costco. 4.8 + 0.92 makes 5.7 or AX5700.
The "2.4GHz AX: 4x4 (Tx/Rx) 1024 QAM 40MHz, up to 1.2Gbps" is wrong, and applies to the RAX80 only.
The "2.4GHz AX: 4x4 (Tx/Rx) 256 QAM 40MHz, up to 920Gbps" is also wrong - it should be "2.4GHz AX: 4x4 (Tx/Rx) 256 QAM 40MHz, up to 0.920Gbps".
Netgear's CHT marketing is as poor as Netgear's CHT engineering and QA.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Confusing/conflicting technical specifications on the RAX75 specifications page...?
Hello hctb,
Thanks for bringing this to our attention. I have notified the team to have this corrected. The correct information is listed below:
2.4GHz AX: 4x4 (Tx/Rx) 256-QAM 40MHz, up to 920Mbps
5GHz AX: 4x4 (Tx/Rx) 1024-QAM 160MHz, up to 4.8Gbps
Regards,
Christian
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Confusing/conflicting technical specifications on the RAX75 specifications page...?
On the very last page of the .pdf user manual from the product page, the listed WIFI signal rate as 1.2Gbps for 2.4GHz 1024 QAM 40MHz.
Is this also incorrect?
Product page: https://www.netgear.com/support/product/rax75.aspx#docs
PDF Manual: http://www.downloads.netgear.com/files/GDC/RAX75/RAX75_UM_EN.pdf
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more