Re: NightHawk Static Route

Madmack31907 · ‎2020-08-14

I have two Netgear routers connect to a TPLink C7 router which is connected the internet.
Netgear R6220 wan port is connect to the C7 lan port using WAN address of 10.0.50.5, submask 255.255.255.0, gw 10.0.50.2, Lan IP is
10.10.10.2.
The RAX20 wan port is connected to the lan port of C7 using WAN of 10.0.50.8 submask 255.255.255.0 and gw of 10.0.50.2, Lan ip is
10.0.5.2.
Trying to set static route from RAX20 (10.0.5.2) to R6220 (10.10.10.2). Attached is a diagram.

Any help will be greatly appreciated.

Christian_R · ‎2020-08-20

Hi Madmack31907,

I would suggest contacting our support team to look into this.

https://www.netgear.com/support/default.aspx

Christian