×

Introducing the Orbi 970 Series Mesh System with WiFi 7(BE) technology. For more information visit the NETGEAR Press Room.

Nighthawk Mesh WiFi

Welcome to the Nighthawk Mesh Community


Advanced Whole Home WiFi Click to Buy Nighthawk Mesh WiFi 6
Reply

Nighthawk Wifi Mesh System with Xfinity Gateway

ehaoe
Aspirant

Nighthawk Wifi Mesh System with Xfinity Gateway

I previously had my own modem connected to a Nighthawk Dual-Band WiFi 6 Mesh System (router with one satellite). I recently upgraded to the xFinity Gateway that has a built-in modem and router. I want to continue using my nighthawk mesh system. Is there a way to connect the gateway with the mesh system without enabling bridge mode, so I can continue using the xFi abilities?

 

When I connect the Nighthawk mesh router to the Xfinity gateway 2 wifi signals being emitted. I would prefer to have 1 wifi network with the mesh wifi capabilities. I do not want to bridge the two because I want to continue using the xFi software that Comcast offers. Does anyone know if it's possible to get these two products to become compatible without creating a double NAT problem?

Message 1 of 4

Accepted Solutions
ehaoe
Aspirant

Re: Nighthawk Wifi Mesh System with Xfinity Gateway

Message 3 of 4

All Replies
FURRYe38
Guru

Re: Nighthawk Wifi Mesh System with Xfinity Gateway

Your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop

 

Netgear has set up a community forum specifically for the NightHawk MESH products. Most of the people who watch that forum are more likely to have experience with NH MESH products and know how to work it better than those of us who follow this router forum. Might be more likely to find someone who has a solution if the question is posted there:
https://community.netgear.com/t5/Nighthawk-Mesh-System/bd-p/en-home-nighthawk-mesh-system

 


Please use this link to the main forum product list to review and choose where to make your posts. 
https://community.netgear.com/t5/NETGEAR-Forum/ct-p/en-netgear


Thank you.

Message 2 of 4
ehaoe
Aspirant

Re: Nighthawk Wifi Mesh System with Xfinity Gateway

Message 3 of 4
FURRYe38
Guru

Re: Nighthawk Wifi Mesh System with Xfinity Gateway

Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

 

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 6436 views
  • 1 kudo
  • 2 in conversation
Announcements

Orbi WiFi 7