RAX120 Slow Speeds Wired

[ehmabe]

My ISP service is 200 mbps DL . Currnelty with the RAX120 my speeds are around 90 DL. When I bypass the router and direct to the modem I am running 226 Mbps.  This happens to the firmware 122 and up.

Any ideas what I settings I need to set. When I used the Qos the speeds drop to less than 20. 

[plemans]

are you testing wired/wireless?

Have you checked the cable? it seems like you're dropping from a gigabit connection to a 100mbps connection. You can check this by logging in and going to advanced-----show statistics.

https://kb.netgear.com/24222/How-do-I-display-Internet-port-statistics-on-my-Nighthawk-router

If its showing that port at 100m and not gigabit, then its time to check cables/modems/ports.  

[ehmabe]

I am testing wired. When connected direct to my modem sb6190. My speeds are over 200 mbps

[plemans]

and what do the port statistics show? 

[ehmabe]

Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time 5G Ethernet Link Down 0 0 0 0 0 00:00:00 WAN 100M/Full 617938 1142419 0 67067 544031 00:08:24 LAN 1 1000M/Full 899947 503200 0 431181 46258 00:45:35 LAN 2 Link Down 00:00:00 LAN 3 1000M/Full 00:45:35 LAN 4 1000M/Full 00:45:35 2.4G WLAN b/g/n/ax 1147M 8629 5253 0 2485 305 00:26:11 5G WLAN a/n/ac/ax 4803M 280762 130203 0 96113 5208 00:26:06Port	Status	TxPkts	RxPkts	Collisions	Tx B/s	Rx B/s	Up Time
5G Ethernet	Link Down	0	0	0	0	0	00:00:00
WAN	100M/Full	617938	1142419	0	67067	544031	00:08:24
LAN 1	1000M/Full	899947	503200	0	431181	46258	00:45:35
LAN 2	Link Down	00:00:00
LAN 3	1000M/Full	00:45:35
LAN 4	1000M/Full	00:45:35
2.4G WLAN b/g/n/ax	1147M	8629	5253	0	2485	305	00:26:11
5G WLAN a/n/ac/ax	4803M	280762	130203	0	96113	5208	00:26:06

[ehmabe]

Should the WAN status be at 100m

[plemans]

There's no way to "set" the port speed. Its auto negotiated. so I'd be betting on the cable or port having issues. 

I'd start with checking those. 

[ehmabe]

Thanks