Acceso Remoto a router R7000

[jvalerio]

Tengo un Router R7000 Que enlaza dos redes diferentes.

En la punta WAN tengo La direccion  10.193.48.53

En las puntas LAN tengo direcciones del orden de 192.168.1.0

El router tiene la direccion LAN 192.168.1.1

Desde la red LAN puedo accesar el Internet que esta en la red 10.193.48.0

Desde la red LAN puedo accesar el enrudaor por el puerto 192.168.1.1

Desde la Red 10.193.48.0 puedo hacer un ping al puerto WAN del enrutador y me contesta.

No puedo accesar el portal de administracion del router desde la red 10.193.48.0

Alguien Sabe como hacerlo??

[FURRYe38]

In inglese per favore

[jvalerio]

I've a R700 router that links two different networks

In the WAN side The IP address port is 10.193.48.53

In the LAN side the address are in the order of 192.168.1.0

The router LAN address is 192.168.1.1

From the LAN side I can access the internet hosted in the 10.193.48.0 network

From de LAN side I can access the router by the port 192.168.1.1

From the 10.93.48.0 network I can make  ping to the router's WAN port (10.193.48.53) and answer is ok.

I Can't access the router's GUI page  via web browser from the 10.193.48.0 network.

Does somebody knows how to do these???

[FURRYe38]

Usually can't ping the routers web page at 192.168.1.1 from the WAN side. 

Do you have Remote Management enabled? This allows access to the routers web page from the WAN side. Otherwise only from the LAN side can you access the routers web page.