Orbi WiFi 7 RBE973
Reply

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

nnagreg
Apprentice

DNS Hijacking R8000P- presenting errors, requires fresh frequently

For the past several months,  I've noticed the when using my router as the DNS server,  it appears to act odd, "Site cannot be reached" ,  "DNS address could not be found. Diagnosing the problem" especially to NEW sites or sites that I infrequently visit.   

 

At first I thought maybe it was my ISP,  thus I changed within the router the DNS to 8.8.8.8 along with a variety of DNS servers, single and multiples.  -The problem still persisted

 

I've then set my local DNS settings to go directly to the 8.8.8.8 - The problem goes away.

 

This happens with a variety of devices, OSes, & browsers:     Windows 10/11,  RPI, and Android, Edge, Chrome, Brave ( errors out 1st then usually refreshes automatically in about 10 seconds)

 

Any Ideas?

Thank you in advance, Greg

 

 

 

Some information about my router:

 R8000p Firmware: V1.4.2.84_1.3.42  GUI:  V1.4.1.70_2.1.46.1  IP6V disabled

 

Debug information pulled today (3/22/2022)   (All files have old odd dates 9/11/2021 - only places that recent files are in /tmp/d2d)

dhcp_dns=8.8.8.8

wan_dns=0.0.0.0
wan_dns1=8.8.8.8
wan_dns_sel=1

services:
15988 nobody 4140 S dnsRedirectReplyd
16068 nobody 1960 S dnsmasq -h -n -c 0 -N -i br0 -r /tmp/resolv.conf -I

16144 nobody 6244 S ddnsd &

========nslookup www.google.com===========
Server: 8.8.8.8
Address 1: 8.8.8.8 dns.google

Name: www.google.com
Address 1: 142.250.190.68 ord37s34-in-f4.1e100.net
Address 2: 2607:f8b0:4009:804::2004 ord38s18-in-x04.1e100.net
========nslookup www.netgear.com===========
Server: 8.8.8.8
Address 1: 8.8.8.8 dns.google

 

 

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 1 of 12

Accepted Solutions
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE -- WORK AROUND

UPDATE 4/18/2022

 

Work Around  (Solved)

 

Enabled - IPV6 Auto  (set to 6to4 Tunnel)

 

Hi All,

By enabling IPv6,  the problem went away.

 

Hope this helps!!

 

Greg

 

 

View solution in original post

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 9 of 12

All Replies
FURRYe38
Guru

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

 

There is many other posts about DNS issues seen on recent 8 series router FW. 

Some report that enabling IPv6 can help. Others mention reverting back to prior working FW version. 

 

NG is aware of the DNS issues. No idea when a fix will be forth coming. 

Message 2 of 12
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

ISP: Midcontinent Communications

Manufacturer: HITRONModel: CODA-45

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 3 of 12
FURRYe38
Guru

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

CODA-45?? 82? 

There should be 4 numbers to the model of this modem...

Message 4 of 12
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

I've confirmed the Model is CODA-45  (No other numbers)

https://us.hitrontech.com/products/service-providers/coda-45-cable-modem/

 

Thank you!

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 5 of 12
FURRYe38
Guru

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently

Ok, just checking to be sure. 

 

I recommend you downgrade FW to v.62 and after that's loaded, factory reset the router and setup from scratch. 

Message 6 of 12
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE

******** UPDATE *************

4/18/2022

Any thoughts?  Problem still exists

 

 

New Firmware applied:   V1.4.3.88_1.3.50

Did a Factory reset and completely re-built the router configuration using the WEB interface.

 

Problem still exists using windows 11 device :  

Seeing 'DNS_PROBE' errors,

Still requires F5 refresh to continue to website during first request  

AND now the router does not supply my manual DNS entries to the clients.

 

Detail below

----------------

Advanced Internet Setup:

Get Dynamically from ISP
Use Static IP Address
IP Address 192.168.88.8
IP Subnet Mask 255.255.255.0
Gateway IP Address 192.168.88.253

 

IP Address192.168.88.8
Subnet Mask255.255.255.0
Default Gateway192.168.88.253
DNS Server8.8.8.8


Domain Name Server (DNS) Address
X Use These DNS Servers
Primary DNS 8.8.8.8
Secondary DNS  blank

 

 

Client DHCP info:

IP =  192.168.99.10  (Client IP)

Netmark 255.255.255.0

Gateway:  192.168.99.3

DNS Server = 192.168.99.3 (Its the internal Router IP)

 

NSLOOKUP  (new Domain names are returned immediately)

> server
Server: UnKnown
*** UnKnown can't find server: Non-existent domain

 

 

 

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 7 of 12
FURRYe38
Guru

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE

Seems like the router is getting a private IP address (192.168.88.#) instead of a public address, ##.##.###.###.

Looking at the modem seems like it doe not have a built in router however wondering if the ISP has it configured differently. 

Can you check with the ISP to see if they have the modem configured differently and see if the modem can pass thru a public IP address? 

 

Message 8 of 12
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE -- WORK AROUND

UPDATE 4/18/2022

 

Work Around  (Solved)

 

Enabled - IPV6 Auto  (set to 6to4 Tunnel)

 

Hi All,

By enabling IPv6,  the problem went away.

 

Hope this helps!!

 

Greg

 

 

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 9 of 12
nnagreg
Apprentice

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE

Yes, this DHCP behavior is odd with the current version of the firmware.

With my ISP, I've elected to not accept the DNS entries from the provider (Midco.net)


Good news is that I was able to resolve the problem with DNS multiple requests,  see my posted down below.   However,  my DHCP clients still point to the router as the DNS server,  odd.

 

Thanks for the help!

 

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 10 of 12
FURRYe38
Guru

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE

Ok glad that worked. 

 

FYI all NG routers use DNS proxy for connected device. NG may have close what you saw in recent FW version.

 

Glad you got it working. Please mark your thread as solved so others will know. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

 

Message 11 of 12
mkrejci
Tutor

Re: DNS Hijacking R8000P- presenting errors, requires fresh frequently --- UPDATE -- WORK AROUND

Thanks, I just setup my R8000P yesterday and have had constant DNS issues with it. I am trying your suggestion regarding turning on IPV6 and will report later if it worked or not.

 

Message 12 of 12
Top Contributors
Discussion stats
  • 11 replies
  • 7549 views
  • 3 kudos
  • 3 in conversation
Announcements

Orbi 770 Series