Orbi WiFi 7 RBE973
Reply

Netgear R7800 Firmware 1.0.2.78

Jellev
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

+1 also in AP-mode.
Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 26 of 42
nasilis
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

Same here. AP mode.

Did downgrade with resets to versions .78, .76 and .74., same rebooting issue

.68 works fine

Message 27 of 42
paillassou
Apprentice

Re: Netgear R7800 Firmware 1.0.2.78

Smiley Frustrated

I do not understand why the NETGEAR development team

persists in continuing on this series of firmware

1.0.2.72

1.0.2.74

1.0.2.76

1.0.2.78

that do not work properly ...Smiley Mad

Message 28 of 42
supermarco
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

AP Mode, DFS Channel 64, USB HDD attached,

Experiencing random reboots as well. 

I just downgraded to .68. If I see another reboot, I'll let you know.  


@paillassou wrote:
Netgear R7800 Firmware 1.0.2.78

EXACLTLY SAME PROBLEMS WITH v1.0.2.74 / v1.0.2.76 / v1.0.2.78

Router reboots randomly
Wifi drops in AP MODE /
unable to use AP MODE
R7800 v1.0.2.78 firmware always contains BUGS

Even with fresh and clean install...
Reset the router. Still the same problem.

Back to firmware v1.0.2.68 and everything is OK again

 

Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 29 of 42

Re: Netgear R7800 Firmware 1.0.2.78

Message 30 of 42

Re: Netgear R7800 Firmware 1.0.2.78

Message 31 of 42
nasilis
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

No reboots for a couple of hours on .80

Message 32 of 42
nasilis
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

No reboots on version .80 for more that 12 hours. Previously it rebooted multiple time in first 30 minutes after install.

I guess it is fixed at least for me.

Message 33 of 42
paillassou
Apprentice

Re: Netgear R7800 Firmware 1.0.2.78

 

NETGEAR R7800 FIRMWARE v1.0.2.80 issues

Netgear R7800 Firmware v1.0.2.80 contains BUGS

EXACLTLY SAME PROBLEMS and random REBOOT !!!

with firmware v1.0.2.74 or v1.0.2.76 or v1.0.2.78

 

R7800 reboots randomly after boot up .... works 2 minutes and reboot...


WIFI drops in AP MODE / unable to use AP MODE


R7800 v1.0.2.80 firmware always contains BUGS ...

 

Even with fresh and clean install :
Reset the router = push reset button for 10s... Still the same problem.

DO NOT UPDATE FIRMWARE v1.0.2.80 R7800

 

Back to firmware v1.0.2.68 and everything is OK again...

 

NETGEAR R7800 FIRMWARE v1.0.2.80 issues - NETGEAR Communities

Message 34 of 42

Re: Netgear R7800 Firmware 1.0.2.78


@paillassou wrote:
 

Reset the router = push reset button for 10s...

That's a "partial" reset.

Message 35 of 42
paillassou
Apprentice

Re: Netgear R7800 Firmware 1.0.2.78

Could you explain how do a complete HARD RESET please ?
THANKS

 

My R7800 was on v1.0.2.68... works fine...


i've done a RESET by pushing button for 10 sec...
R7800 restarts v1.0.2.68, launch GUI 192.168.1.1, assistant starts, and run upgrade to fw v1.0.2.80

R7800 restarts the new v1.0.2.80... and enter all manual parameters  (AP mode, wifi ssid, key ... )

 

the R7800 works for 5 minutes... wifi drops ... internet drops.... and R7800 reboots... 

 

Believe me, honestly, it's not a game, for me, to upgrade... week after week...
THE ONLY THING i would is that my R7800 works fine, with AP mode, with the latest firmware...
BUT .... since fw v1.0.2.72, v1.0.2.74, v1.0.2.78, v1.0.2.80 

it's IMPOSSIBLE !!!!



Message 36 of 42

Re: Netgear R7800 Firmware 1.0.2.78


@paillassou wrote:

Could you explain how do a complete HARD RESET please ?
THANKS

 

 

 

  • Press reset for 30 seconds
  • Keep pressing reset while removing power
  • Keep pressing reset for another 30 seconds while apply power

 

 

 

Message 37 of 42
nasilis
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

Me again. .80 started to reboot. I think additional active users triggers reboot issue.

Back to .68 

Message 38 of 42
paillassou
Apprentice

Re: Netgear R7800 Firmware 1.0.2.78

@michaelkenward 

 

RESET 

https://www.downloads.netgear.com/files/GDC/R7800/R7800_UM_EN.pdf

page 171

 

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object

to press andhold the Reset button on the back of the router for at least seven seconds.

The router resets and returns to the factory configuration settings shown in the following table.

 

NOTHING CHANGE AFTER RESET 
v.1.0.2.80 reboot or WIFI drops or lost internet (AP mode) after 5 minutes....

Message 39 of 42
paillassou
Apprentice

Re: Netgear R7800 Firmware 1.0.2.78

I ask other users who are experiencing these problems to post here


NETGEAR R7800 FIRMWARE v1.0.2.80 issues

 

NETGEAR R7800 FIRMWARE v1.0.2.80 issues - NETGEAR Communities

 

 

Message 40 of 42
Jellev
Tutor

Re: Netgear R7800 Firmware 1.0.2.78

This will be my last netgear product, had the same sh*t with an R7000, now with the R7800, I'm sick of it!

Model: R7800|Nighthawk X4S AC2600 Wifi Router
Message 41 of 42
Iozone
Aspirant

Re: Netgear R7800 Firmware 1.0.2.78

Easy fix.  Don't use Netgear firmware.  Install DD-WRT and you'll be so much happier.  I certainly am.

Message 42 of 42
Top Contributors
Discussion stats
  • 41 replies
  • 8789 views
  • 11 kudos
  • 13 in conversation
Announcements

Orbi 770 Series