Orbi WiFi 7 RBE973
Reply

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released


@jrod10133 wrote:

R8000P Nighthawk X6S AC4000

How been can having this issue with three firmware <What issue? 

Firmware Version 1.4.4.94
Firmware Version 1.4.3.88
Firmware Version 1.4.2.84

 

the only firmware that is working is Firmware Version 1.4.1.68 this an Annoying situation Im been having this issue for over a year now and I'm really not comfortable being in an old firmware but I have no choice

 

NG is taking a look at this. So for now. Use what works best for you. All we can do for now. 

 


 

Message 26 of 311
Retired_Member
Not applicable

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Done.

 

I put IPV6 in Auto Config.

The problems were solved.

Thanks

Message 27 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

👍

Message 28 of 311
Retired_Member
Not applicable

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Model: R8000P|Nighthawk X6S AC4000 Tri Band WiFi Router
Message 29 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Yep, thats been found. Thanks. 

Message 30 of 311
Retired_Member
Not applicable

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

solution?

Message 31 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Try downgrading or using 3rd party FW. 

We've passed this onto NG. Will have to wait for them to fix these issues. 


@Retired_Member wrote:

solution?


 

Message 32 of 311
Retired_Member
Not applicable

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Thanks

Message 33 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

for the NTP setting try this address: time-a-wwv.nist.gov

Message 34 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

 

I have been stuck using old firmware on my R8000P (V1.4.1.36_1.3.1) because of the following issues:

 

  • 6to4 tunneling addresses were unable to be set under later firmware

 

  • Performance Optimization Database  corruption  - the version and release date were blank and I don't think they were working. effects were higher ping times (sometimes into the 1k range) and pages not loading correctly. I do not have a 1Gbps connection so this feature is needed by me. my subscribed internet speed is 10Mbps down / 1Mbps up.

 

  • attached devices page not showing attached devices.- only a factory reset and re-entering of all the settings would fix this and the previous problem, which occurred on an almost bi-weekly basis

 

have these issues been solved under the latest firmware?

Message 35 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Also.. router autoupdate lists this version but fails to install. attempting to do a manual install results with the router saying the firmware is incorrect.

 

cybot_0-1665969039387.png

 

Message 36 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Are you sure you downloaded the correct FW file for your model Router? There are 3 different models listed in this thread. 


@cybot wrote:

Also.. router autoupdate lists this version but fails to install. attempting to do a manual install results with the router saying the firmware is incorrect.

 


 

Message 37 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Yes I Downloaded It Twice From The R8000p downloads Page. The Router Is Not Accepting The New Firmware,  Even As A Manual Update.

Message 38 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Came Across This Post And Wondered If I Could Be Suffering From Same Issue

 

https://community.netgear.com/t5/Nighthawk-WiFi-Routers/R8000P-V1-4-1-50-Update-workaround/m-p/21718...

Message 39 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Possible. Can you try an manually update to v1.4.1.68?

Message 40 of 311
222Graham222
Guide

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Nighthawk R8000P
Firmware Version
V1.4.4.94_1.3.56
Will not allow me to reserve an IP address for my devices.
I have some configured already, but wanted a new one for my Roku that isn't showing the correct address.
I removed the one I had configured for 10.0.0.14 OK
I try to set a new one, I click on the correct device on the add screen, it then allows me to change the IP address to the one I require, when I click add I get the message Invalid MAC address. 
The Mac address has no colons in the returned error message, I have rebooted multiple times tried it with no internet or anything else attached to the computer using the interface, I have no idea what's happening!

Oh BTW I corrected the loss of assigned IP by flashing a backup version of the router, it is still not operating correctly.
HELP!

Message 41 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Can you try an manually downgrade to v1.4.1.68?

This issue has been passed onto NG. 


@222Graham222 wrote:

Nighthawk R8000P
Firmware Version
V1.4.4.94_1.3.56
Will not allow me to reserve an IP address for my devices.
I have some configured already, but wanted a new one for my Roku that isn't showing the correct address.
I removed the one I had configured for 10.0.0.14 OK
I try to set a new one, I click on the correct device on the add screen, it then allows me to change the IP address to the one I require, when I click add I get the message Invalid MAC address. 
The Mac address has no colons in the returned error message, I have rebooted multiple times tried it with no internet or anything else attached to the computer using the interface, I have no idea what's happening!

Oh BTW I corrected the loss of assigned IP by flashing a backup version of the router, it is still not operating correctly.
HELP!


 

Message 42 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

I0p-V1.4.4.94_.3Installing The Firmware Version You Suggested.  Upgraded With Out ANy Issues. That's Not To Say That There Are No Issues With The Firmware ItSelf Though. Trying To Install The Firmware File R8000p-V1.4.4.94_1.3.56.chk still Results With A Message Saying The Firmware File Is Incorrect. It Also Still Will Not Auto Install Via The Update Button. 

Message 43 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Does same thing happen when you try an manually update to v1.4.1.68?


@cybot wrote:

I0p-V1.4.4.94_.3Installing The Firmware Version You Suggested.  Upgraded With Out ANy Issues. That's Not To Say That There Are No Issues With The Firmware ItSelf Though. Trying To Install The Firmware File R8000p-V1.4.4.94_1.3.56.chk still Results With A Message Saying The Firmware File Is Incorrect. It Also Still Will Not Auto Install Via The Update Button. 


 

Message 44 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

No, the manual update to .68 went normally. trying to then update to .94 still presents with same error.

 

 

just for kicks.... could we compare the hash for the file that i have and the someonelses R8000P .94 file?

 

Here is the hash for the .zip file: SHA256 DE3BC7E9B2F103530AFC9D684AB66F8364BD0D58FE1E33EA22AD68998B4951BB\

 

here is for the file within: SHA256 0556C17B83C4C7ADE35D387B35DF742A0990592A7F33677CD6B3729C51B36B8A

 

i would be very surprised if i happened to get a bad file all three times i have downloaded the file.

Message 45 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

I would keep the v.68 loaded for now. Users have already posted that there are problems with v.94 so keep v.68 for now. I've already passed this onto NG. 

Message 46 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

So.... it looks like the .68 suffers from the long standing ipv6 dns issue as well. on top of that, it appears that because of the error, the 6to4 ipv4 address is entered but not used. all attempts at accessing ip6 addresses fail, even when ipv5 dns server address is entered into windows.

 

 

Message 47 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Just use auto config. 

Message 48 of 311
cybot
Luminary

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

it is set to autoconfig 

 

cybot_0-1666144732542.png

 

Message 49 of 311
FURRYe38
Guru

Re: New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

Set the 6to4 to Auto

Message 50 of 311
Top Contributors
Announcements

Orbi WiFi 7