New - R7900P/R7960P/R8000P Firmware Version 1.4.4.94 Released

[FURRYe38]

Thanks for letting us know. 

[SkyHopper]

Considering that Access Mode breaks the web interface is a major bug. I hope that NetGear will at least release a patch for this because it kinda bricks the router in access point mode.

The R7900P is using a Broadcom BCM4906 chipset and not Atheros. So the support on 3rd party FW such as OpenWRT or DD-WRT is limited due to Broadcom lack of open source licensing if I recall.

[FURRYe38]

Please review the link regarding EoL. 

[wglotz]

"Exactly" how does one enable PM?

[FURRYe38]

Select your NG Forum user name and a menu will appear. Go to My Settings/Preferences/Private Messenger and make sure that the Turn on private messages check box has a check mark in it. Save the setting. 

---

@wglotz wrote:

"Exactly" how does one enable PM?

---

[s_han]

Hello, I am having the issues where I am getting the invalid MAC address error when trying to do an address reservation. I have the R7960P with firmware v1.4.4.94 running on it. May I get the beta version please.

[shadowsports]

Greetings @FURRYe38 

May I please have a link via PM for the beta FW. 

Router model: R8000P

Thanks

[DoYu]

Hi @FURRYe38 

Could you send me by PM a link to download this beta firmware that fix this problem?

Router model: R8000P

Thanks

[ktarun]

I would like to try the beta as well.

[FURRYe38]

Which model router do you have? 

---

@ktarun wrote:

I would like to try the beta as well.

---

[ktarun]

The netgear one is R8000P

[BLING2X]

Could you send me by PM a link to download this beta firmware that fix this problem?

Router model: R8000P

[mlenahan]

Wondering that too.

We know the R7900P, R7960P & R8000P use exactly the same firmware file, however from what I can tell the R7900P and R8000P are at EOL, while the R7960P is not.

The buggy 1.4.4.94 firmware was released almost a year ago (Oct '22) and the best we have is a beta release to address its issues (thanks for at least that). But as others point out, even the beta has some issues too.

Will we ever get an official new firmware or are we just dead in the water? I've searched high/low for open firmware and the best I can find is OPENWRT for an R8000P however folks complained of no wi-fi, only wired. I tired to flash mine, but could not get the TTL interface to work.

Oh I wish any open firmware was an option for us.

[FURRYe38]

Would you like the beta FW version that fixes the IP address reservation issue? 

---

@mlenahan wrote:

Wondering that too.

We know the R7900P, R7960P & R8000P use exactly the same firmware file, however from what I can tell the R7900P and R8000P are at EOL, while the R7960P is not.

The buggy 1.4.4.94 firmware was released almost a year ago (Oct '22) and the best we have is a beta release to address its issues (thanks for at least that). But as others point out, even the beta has some issues too.

Will we ever get an official new firmware or are we just dead in the water? I've searched high/low for open firmware and the best I can find is OPENWRT for an R8000P however folks complained of no wi-fi, only wired. I tired to flash mine, but could not get the TTL interface to work.

Oh I wish any open firmware was an option for us.

---

[mlenahan]

No thanks, I already have the beta version. It was more a question if: Is an unreleased beta from almost a year ago, going to be the last firmware for this group of routers.

[FURRYe38]

Don't know. Will ask about it. 

[baudtender]

I have an R7960P that suffers from the same MAC address but reported here.  
If someone could please provide me with the beta firmware that fixes this, I would sure appreciate it!

[SiraMirai]

Could I also get the beta firmware for the R8000P?
@FURRYe38 
Thanks!

[Robot_M]

would it be possible to get this beta firmware for a r8000p? @FURRYe38 

[Plzgimmer7960p]

BUMP

May I have the beta plz for 7960p

[Phycodes]

Can I get the beta?  On a R7900P

[FURRYe38]

Unfortunately NG didn't put forth a beta for the R7900P since it went EoL service. Only thing that you can do is to revert back to an older version of FW that works or find some 3rd party FW like DD-WRT or OpenWRT FW to put on the R7900P.

Good Luck.

---

@Phycodes wrote:

Can I get the beta?  On a R7900P

---

[Springveldt]

Like many others I've got a R8000P with the MAC address issue. I'm betting they aren't handling the colon's in the string properly. Complete amateur hour that it's been over a year and no attempt to fix it other than some guy on a forum supplying a clearly dodgy beta file link since it's all by PM.

Think I'll just cut my losses, sell this on eBay and get a decent router.

[michaelkenward]

---

@Springveldt wrote:

Complete amateur hour that it's been over a year and no attempt to fix it other than some guy on a forum supplying a clearly dodgy beta file link since it's all by PM.

---

I agree that this is an odd way for Netgear to go about things, but I think you can rely on the beta firmware on offer. It may not be from a staff person, but it is often seems like it.

[Springveldt]

I get the forum user is just trying to help others out but it's a completely bizarre way of doing things. Have Netgear even acknowledged the issue? Or since it's EOL have they just washed their hands of it and left everyone with a broken basic function of a router? Not being able to set a fixed address on your own LAN because Netgear can't parse a MAC address out of a string is completely mental. It worked in an older firmware, the bug is repeatable and it would take about 1 minute to fix it. The fact they haven't bothered to fix it speaks volumes for me.