Orbi WiFi 7 RBE973
Reply

Re: Nighthawk R7450 Lost local network after firmware update

buzbard
Tutor

Nighthawk R7450 Lost local network after firmware update

After updating my router's firmware to V1.2.0.92_1.0.1, I have lost all local network connections.

I have 4 Windows 10Pro PC's connected, they all still have internet access, but are not able to see each other on the local network.

I have a USB3 HDD connected to the router and the Media Server still works for BlueRay/DVD players, but I cannot connect to the Readyshare drive with any PC to access the files, I have to physically remove the drive from the router and connect it to a PC to access the files.

 

In the PCs I have "SMB 1.0/CIFS Client" turned on, but turning it off doesn't help.

I have factory reset the router, it did not help.

 

Everything worked fine before the firmware update.

Anything else I should try?

 

Thanks

Message 1 of 9

Accepted Solutions

Re: Nighthawk R7450 Lost local network after firmware update


@buzbard wrote:

Yes network is still set to private.

 


Tried the network troubleshooter in Windows?

 

It used to be a joke but has been getting better/

 

Have you tried typing the device addresses into Windows Explorer?

 

Devices have a habit of going AWOL. They suddenly sprint into view if I do that. One reason why I keep shortcuts to the rest of the network, PCs and NAS stuff.

 

 

View solution in original post

Message 6 of 9

All Replies
FURRYe38
Guru

Re: Nighthawk R7450 Lost local network after firmware update

Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update?
Be sure to restart your network in this sequence:
Turn off and unplug modem.
Turn off router and computers.
Plug in and turn on modem. Wait 2 minutes for it to connect.
Turn on the router and wait 2 minutes for it to connect.
Turn on computers and rest of network.

Message 2 of 9
plemans
Guru

Re: Nighthawk R7450 Lost local network after firmware update

Did you check on the windows pc's to see if they'd changed their network connections from private to public? 

It could be it thought the router was a new network after the firmware upgrade and when set to public, isn't able to see the shared drives/computers. 

Message 3 of 9
buzbard
Tutor

Re: Nighthawk R7450 Lost local network after firmware update

Just tried all that again with no luck.

Disconnected power to both modem and router, and waited 5 minutes.

I powered up the modem and waited for the internet connection (about 3 minutes), then I connected power to the router and powered it up.

I then waited another 5 minutes before checking network connections.

 

When I open Windows Explorer and click Network, I can see the PC that I'm currently on plus the R7450 (Gateway), modem "ZyXEL APS" and printer (Brother HL-L2360D series) and that's all.

 

 

Message 4 of 9
buzbard
Tutor

Re: Nighthawk R7450 Lost local network after firmware update

Yes network is still set to private.

 

Message 5 of 9

Re: Nighthawk R7450 Lost local network after firmware update


@buzbard wrote:

Yes network is still set to private.

 


Tried the network troubleshooter in Windows?

 

It used to be a joke but has been getting better/

 

Have you tried typing the device addresses into Windows Explorer?

 

Devices have a habit of going AWOL. They suddenly sprint into view if I do that. One reason why I keep shortcuts to the rest of the network, PCs and NAS stuff.

 

 

Message 6 of 9
buzbard
Tutor

Re: Nighthawk R7450 Lost local network after firmware update

Typing the device address into explorer, sheesh, why didn't I think of that?

Used to do it all the time in Windows 2000, forgot all about it.

 

\\READYSHARE\USB_Storage

 

Thanks!!

Message 7 of 9
FURRYe38
Guru

Re: Nighthawk R7450 Lost local network after firmware update

Glad you got it working. Be sure to save off a back up configuration to file for safe keeping. Saves time if a reset is needed.
https://kb.netgear.com/24231/How-do-I-back-up-the-router-configuration-settings-on-my-Nighthawk-rout...
Enjoy. 📡

 

Message 8 of 9

Re: Nighthawk R7450 Lost local network after firmware update


@buzbard wrote:

Typing the device address into explorer, sheesh, why didn't I think of that?

Used to do it all the time in Windows 2000, forgot all about it.

 

\\READYSHARE\USB_Storage

 

Thanks!!


I suppose it is progress that you haven't had to use that one lately.

 

Windows networking has always caused problems here. NAS things go AWOL all the time here.

 

 

 

Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 1416 views
  • 2 kudos
  • 4 in conversation
Announcements

Orbi WiFi 7