NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

deef's avatar
deef
Aspirant
May 12, 2017
Solved

Portfowarding on R7000

Portforwarding is not working with Ziggo Connect box
Troubleshooting
  • deef's avatar
    deef
    May 12, 2017

    I resetted the modem And router. Now its working.

    thanks for Your support.

FURRYe38's avatar
FURRYe38
Guru - Experienced User
May 12, 2017

Need to find out if your ISP Modem has a built in router or not. If not, then the R7000 should work well with out any configurations needed if you leave uPnP enabled. 

 

From what I can tell, I think your modem has a built in router:

https://www.ziggo.nl/klantenservice/wifi/modem/connect-box/

 

I'd see if this unit has a DMZ and put the R7000s WAN port IP address in to the modems DMZ. 

 

Might check with your ISP to see if this modem can be fully bridged. If not, use the DMZ option above. 

deef's avatar
deef
Aspirant
May 12, 2017

My ISP modem has a router, but i deactivated it.

So i use my netgear as router.

 

  • FURRYe38's avatar
    FURRYe38
    Guru - Experienced User
    May 12, 2017

    What is the IP address the R7000 is getting on the WAN port? 

    • deef's avatar
      deef
      Aspirant
      May 12, 2017

      I resetted the modem And router. Now its working.

      thanks for Your support.

      • FURRYe38's avatar
        FURRYe38
        Guru - Experienced User
        May 12, 2017

        Good Luck.