R7000-V1.0.5.52_1.1.81.chk

[Retired_Member]

I stumbled on this FW today and was wondering if anyone @ Netgear cared to comment on it.

It's 12KB larger than the .48

Dated 12/21/2015

Has all the options that .48 had from what I can tell

Confirmed Port Forwarding does work for QNAPCLOUD

Faster file transfers from LAN to WiFi @ 866.7  peaked 74MBps averaged mid 60's

Connection rates 866.7~780.0MBps

A 7.73GB file now tranfers in UNDER 2 minutes.

I am able to ping and reach my gateway @ 10.0.0.1 which I couldn't with .48

Seems like a winner so far.

Good JOB!

[Retired_Member · Accepted solution]

dBm levels should read -26 & -25

As a comparison to r8000 5g -38   2.4 -28

A 7.73GB file now tranfers in UNDER 2 minutes (mid 60's MBps) with r7000 ....R8000 takes over 2.5 minutes @ an average of  50MBps

[Retired_Member]

iPhone 4s Speedtest now hits 52MBps which is a first, and is better than mid 30's with r8000.

R7000 2.4 and auto channel in case your wondering

Signal (dBm) is 26 5g @1300 and 25 2.4 @ 289  These are back to the levels the r7000 had when first released more than 2 years ago

[Retired_Member · Accepted solution]

dBm levels should read -26 & -25

As a comparison to r8000 5g -38   2.4 -28

A 7.73GB file now tranfers in UNDER 2 minutes (mid 60's MBps) with r7000 ....R8000 takes over 2.5 minutes @ an average of  50MBps

[SkyOwl]

Link?

[mbob4568]

Here's the FTP link. It's slow at moment

ftp://download.netgear.com.cn:8084/R7000/R7000-V1.0.5.52_1.1.81.chk

[chascent]

Loaded and running perfectly so far! File transfers fastest I have ever seen.

Does anyone know if this has the laest Broadcom drivers?

CC

[Retired_Member]

I'm not seeing it on the router updater or netgear website yet, wat was that other link you sent?

[mondenath]

netgear admin will post as new beta fw soon

[Retired_Member]

The link in post 16 is working. What's the problem.

[mondenath]

No I said netgear admin will soon post as new beta fw. Nothing to be reported. If there are some changelogs which we can expect them to update .

[Retired_Member]

new version has been released

check your router update

[mbob4568]

Running it now and it added an Arlo tab for web cams. Seems to be ok.

[netwrks]

I haven't run stock firmware in such a long time, but I may load this on of my 7000's. If  anyone runs this FW in AP mode, can you check to see if NTP works? 

[Retired_Member]

I'm sort of confused at the moment, so we have a beta firmware which is V1.0.5.52 which looks to be really good then now we have 1.0.6.28 which doesnt seem to be as good? XD I would have thought 1.0.6.28 would have included everything V1.0.5.52 had

[iRate3]

Runs well. The added support for the Arlo cameras works great - means I can use the R7000 as the base station and ditch the other hardware that came with the cameras.