I've got an RAX200 running in AP mode and not ran into that issue.
Does it happen if smart connect is disabled?
when did it start?
What device is acting as router/dhcp server?
Current setup: CM2000-> RBKE963B-> Trendnet TEG-S380-> GS716T-> pi-hole also in AP setup: RAXE500->EAX80 1.4gig download/50mbps upload from Xfinity We’re members of the public helping out on our own time.
Netgear has set up a community forum specifically for the NightHawk RAX WiFi6 Router products. Most of the people who watch that forum are more likely to have experience with NH RAX router products and know how to work it better than those of us who follow this router forum. Might be more likely to find someone who has a solution if the question is posted there: https://community.netgear.com/t5/Nighthawk-Routers-with-WiFi-6-AX/bd-p/en-home-routers-nighthawk-wif... Thank you.
Simple: The ISP only assigns one public IP address to your Internet connection resp. the ONU. The switch must be installed behind the RAX200 to a LAN port:
Thanks for your reply. When smart connect is disabled, it doesn't happen.
The first, my iPhone (or iPad) connected. It got IP address correctly. Next, I turned off the wi-fi switch on the smart phone, And turned on the switch. It couldn't get IP address correctly.
The functions ( Router and DHCP ) runs on 有線ルーター.
Sorry for all repliers. I have posted it on the English community by mistake.
