NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
luga13
Jan 31, 2024Guide
Nighthawk MR60 dropping internet speed
my Night Hawk MR60 with two satellites was behaving properly giving me as expected internet speeds, however not sure when it happened but definitely between October 2023 and January 2024, the maximum...
luga13
Feb 01, 2024Guide
thanks i did this 30-30-30, my adapter on my laptop went to 1G.
but what i did was:
1. I disconnected the only device i had in my mr60
2. unpluged it and plugged the MR again
3. While in white blinking state, i connected the laptop
4. Speed = 1.0Gbps
FURRYe38
Feb 01, 2024Guru - Experienced User
OK. MR WAN port should be good then at 1Gb. Power the MR OFF along with the ISP Modem. Connect up the MR to the modem and power ON the modem, give 15 seconds wait time, then power ON the MR. After the MR is ready, check the WAN port speed on the MRs web page.
- luga13Feb 01, 2024Guide
done, it continues reporting the following:
WAN 100
Lan1 1000 (my laptop is connected to the MR port)
the one thing i noticed is that during the boot up process, the modem led ligths started blinking, both orange and green, after a while, green went off and orange remained on.
- FURRYe38Feb 01, 2024Guru - Experienced User
I'd ask your ISP for a new modem.
Last resort, something you can try, get you a 5 port Gb non managed LAN switch. (GS-105) These have more LED indications and put in between the ISP Modem and the MR. Don't connect anything else to this switch, just the ISP Modem and MR on it's WAN port. - schumakuFeb 01, 2024Guru - Experienced User
luga13 wrote:WAN 100
Lan1 1000 (my laptop is connected to the MR port)
Just curious where you discovered this, especially for the WAN port. Not a regular Nighthawk Mesh user I admit, more at home in the SMB and business world, so be gentle please.
luga13 wrote:the one thing i noticed is that during the boot up process, the modem led ligths started blinking, both orange and green, after a while, green went off and orange remained on.
This could indeed make sense in case the WAN port does re-engotiate the Ethernet link speed. Just cold boot (power) the MR60 and watch the LEDs.
- luga13Feb 01, 2024Guide
no worries, i posted a photo above...the last speed test i did at 500MBPS was in October then now in January 2023 i tried again and it was only 90ish..
thanks
- luga13Feb 01, 2024Guide
I actually did, i blamed them (haha) and they swaped the old Modem for a new one, although it was exactly the same model but just new in a box
- luga13Feb 02, 2024Guide
for a second i thought it was going to work with the switch in between, the green led on the modem stays on but MR still at 90.
i guess this is it, need a new system
thank you all, it was an interesting exercise and a good learning experience
- FURRYe38Feb 02, 2024Guru - Experienced User
At least you know now.
There's MR replacements on Amazon if you have access:
- schumakuFeb 02, 2024Guru - Experienced User
The modem swap didn't happen around January 7 (roughly the date I remember from your posted screenshot)?
- luga13Feb 02, 2024Guide
yes, it happened around that date in January, wonder why you ask?