1G Wan speed support in R7000

[dannykeren]

hi all,

can someone please confirm if the R7000 support 1G wan Speed?

[dannykeren]

Hi CASE,

thank you very much for your quick reply

just to malke sure, if i have a client with a modem-router of a 1G wan, if i'll use it as a bridge to the R7000, i'll just be able to use 600M speed or the R700 won't be able to work at all?

Best Regrads,

Danny

[michaelkenward]

There is support material, including a manual, for the R7000 somewhere at the end of this link:

>>>> R7000 | Product | Support | NETGEAR <<<<

It lists the specifications.

[dannykeren]

@Case850
not looking to replace the client's router...

he'll be fine with "only" 600mb wan connection.

i just want to make sure that it will infact support only 600 out of the 1g and wont fail the deliver the wan.

[sorin_popescu]

R7000 is capable of 945 Mbit/s, I own this router and this is the max speed i have obtained on wire.

[sorin_popescu]

Hi,
There is no secret, I am using one beta firmware version 1.0.7.3 because in the official released firmware pppoe ipv6 dual stack was not working. Anyone who has low performance on 1Gbit connection should contact netgear support because this router is capable of ~ 930 Mbit/s wan to lan.

[sorin_popescu]

I know that is old, but this is the only version that has a working pppoe ipv6 dual stack. I have an open case at netgear and they are telling me that all the fixes regarding ipv6 PD should be included in 1.0.9.30 final version.

[sorin_popescu]

We’ll see, i want to keep that ticket open untill the router performs as it should.