Can't configure a fixed IP address when using Bridge mode on R6700v2 running V220.127.116.11_1.0.1
I am trying to configure a R6700v2 running V18.104.22.168_1.0.1 in Bridge Mode, to connect to an AP, using a fixed IP address.
I have selected Bridge Mode, entered the SSID/password of the AP, and left DHCP enabled, and the R6700v2 connects successfully. However, when I disable DHCP and enter the fixed IP address information on the Bridge Mode configuration page (see attached screen shot), and click apply, the 6700v2 continues to use DHCP to get an address from the AP.
When I return to the Bridge Mode configuration page after the settings have been applied, DHCP is again enabled. It appears that the configuration changes to disable DHCP are not being applied or saved.
I have been able to disable DHCP in Bridge Mode successfully on older versions of firmware.
Is anyone running this configuration successfully on this version of firmware? Can anyone provide instructions that works for them? Thanks in advance.
Re: Can't configure a fixed IP address when using Bridge mode on R6700v2 running V22.214.171.124_1.0.1
> [...] the 6700v2 continues to use DHCP to get an address from the AP.
I've never tried to configure a static LAN IP address on any
router-as-bridge, so I know nothing, but why not reserve an address for
the bridge in the DHCP server (in some router?) behind your
(unspecified) "the AP"?