This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
FW 1.0.11.110 having IPV6 issues/connectivity drops
Yesterday i've updated my router R7000 to the latest FW 1.0.11.110 and started not geting IPV6 IP's issued to connected devices and failing IPV6 test on a web with random Wifi and LAN connectivity issues. Also many Corrected / Uncorrectables errors on my Arris SB8200 modem. Tested directly connected to modem after powercycle it and all issues gone and zero erorrs. So reverting back to stable last FW V1.0.11.106_10.2.100. It needs to be looked at this. Please post below if you noticed something with this FW.
Correct. Also i had an issue with resetting to factory defaults with a pin push (web reset worked fine), it was not resetting. But finaly got it reset by tftp and many pin resets. So now i left a router on V1.0.10.90_10.2.90 FW and works fine without a glitch. Don't want to experiment anymore..
> [...] So now i left a router on V1.0.10.90_10.2.90 FW [...]
Where (when) did you find that one?
I keep all FW downloads on my drive, just in case i need to downgrade. It's just a habit. I have it form 12/9/2019. I've noticed it was pulled from a DL list, i dont seem to notice anything wrong with it. (for 2 weeks now).
yes, i reverted to V1.0.11.100_10.2.100 FW and all is solved. Make sure you do a pin reset and not software one before and after downgrade also if you have 1.0.11.110 settings saved as a backup, don't use those, use from previouse fw's not this one.
