- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Help with optimal settings on Nighthawk R7800
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello folks;
I just received my new R7800 Nighthawk X4S router and i configured it and set it up & i updated the firmware to 1.0.2.38 which is the latest and it works but i noticed the speed im getting now with the new router is less than 27 Mbps while with my old TP Link was around 60 Mbps. I did setup both 5 GH & 2.4 GH and tried few tweaks but nothing helped. Whats the optimal configurations for my new router so i can get the highest speed performance? Please provide any tweaks needed to get the max out of my new router
Thank you in advance
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Its because its not Netgears original firmware, although its built on it. Voxels firmware always shows this, I guess there is some check in offical firmware to say its the latest so you can use the built in update feature for new offical firmware, but its fine and you can ignore that message and update to Voxels.
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
With out knowing if thats your wifi and which band or your wired lan ports hard to say why the different.
Have you turned qos and traffic monitoring off that may help do not know what speed your paying for even.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
My QoS is off and I'm not monitoring. My original speed from my ISP is 60 Mbps and it was always around 60 Mbps when i was using my TP Link router until yesterday. I'm talking about my Wifi and not wired connection.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
I found the solution. I had to do a full reset and then updated teh FW and that fixed the issue. downgrading the FW did not help so i had to go back to the default settings.
Thanks for your help
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
Generally you can get away with resetting the router after a firmware update. Or if you want a better version using Netgears firmware as a base but far more optimised go to smallnetbuilders (link below) and use Voxels firmware. He updates all the packages and code he can get to that netgear can't be bothered with and believe me thats a lot. Your router is running code that is sometimes over ten years old and vulnerable even in the latest updates. Netgear dont take updates or security very seriously sadly. QoS should not slow your router down, I use it as it help as I dont have a hugely fast connection and Qualcomms adaptive QoS is very good. Saying that the database has not been updated since April this year, another thing Netgear dont do often.
https://www.snbforums.com/threads/custom-firmware-build-for-r7800-v-1-0-2-40sf-1-0-2-41sf.42222/
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
Thanks for your advice and for the link. Currently i'm on v1.0.2.36 and when i tried to upgrade to Voxel version 1.0.2.41SF, i got a message saying this Voxel version is older than the version i currently have although i see on Voxel website the date of that version to be 11/2017. Any idea why is that?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
@Katkota wrote:
I found the solution. I had to do a full reset and then updated teh FW and that fixed the issue.
It is a painful process, but a full reset is always the first thing to try if you have post-flash problems.
New firmware sometimes introduces changes that are not compatible with the old configuration.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Its because its not Netgears original firmware, although its built on it. Voxels firmware always shows this, I guess there is some check in offical firmware to say its the latest so you can use the built in update feature for new offical firmware, but its fine and you can ignore that message and update to Voxels.
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Re: Help with optimal settings on Nighthawk R7800
I did install it and so far so good. Thanks a lot for all the help 🙂
• What is the difference between WiFi 6 and WiFi 7?
• Yes! WiFi 7 is backwards compatible with other Wifi devices? Learn more