Reply
Highlighted
Aspirant

LAN SETUP , in the Use Router as DHCP Server I cant change and 1 in the starting IP address????

 
Message 1 of 4
Highlighted
Guru

Re: LAN SETUP , in the Use Router as DHCP Server I cant change and 1 in the starting IP address??

> [...] I cant change and 1 in the starting IP address????

 

   Huh?  What, exactly, would you like to change to what, and why?

 

   Are we discussing some router with a model number and a firmware
version?

 

   General advice: "can[']t is not a useful problem description.  It
does not say what you did.  It does not say what happened when you did
it.  As usual, showing actual actions (commands) with their actual
results (error messages, LED indicators, ...) can be more helpful than
vague descriptions or interpretations.

Message 2 of 4
Highlighted
Aspirant

Re: LAN SETUP , in the Use Router as DHCP Server I cant change and 1 in the starting IP address??

I was attempting to bridge two network routers and in the tutorial it stated that I should change the DHCP Server from 192.168.1.1 and change it 192.168.1.2 . during the process I realized that it was setting up a ethernet connection as a opposed to one that was wireless so

and try to change it back to 192.168.1.1, and click on the apply button and everything remained the same . Please Help ,If need to add any more don't information don't hesitate to ask .


Model: R8000|Nighthawk X6 AC3200 Smart WIFI Router, RAX80|Nighthawk AX8 8-Stream WiFi Router
Message 3 of 4
Guru

Re: LAN SETUP , in the Use Router as DHCP Server I cant change and 1 in the starting IP address??

> I was attempting to bridge two network routers [...]

 

   What, exactly, does that mean to you?  What are you trying to connect
to what, how?  Why?  Is there some actual problem which you are trying
to solve?

 

> Model: R8000|Nighthawk X6 AC3200 Smart WIFI Router, RAX80|Nighthawk
> AX8 8-Stream WiFi Router

 

   Those are the two routers?  Is one of them connected to a modem (or
other ISP termination)?  Why are you adding the other one?

 

> [...] and in the tutorial [...]

 

   _Which_ "the tutorial"?  Can I read it, too?

 

> [...] I should change the DHCP Server from 192.168.1.1 and change it
> 192.168.1.2 .

 

   A DHCP server is not an IP address.  What, exactly, are you trying to
change?

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 193 views
  • 0 kudos
  • 2 in conversation
Announcements