Nighthawk R7000

[Jcgreco]

I tried to do the firmware update and it looks like it failed. I can’t access the web portal nor can I update the firmware manually. It gets to about 50% and Fails The router is only eight months old And it looks like the firmware has crashed it. Any ideas on how to manually update from my computer to the router. I did reset to default she’s not working

[microchip8 · Accepted solution]

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

[microchip8 · Accepted solution]

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

[michaelkenward]

But first describe the state of the LEDs on the R7000.

[Jcgreco]

The power is flashing white and orange. And the cable I’m connected to is white

[Jcgreco]

This is work great thank you 

[michaelkenward]

Does that mean TFTP fixed it?

If so, it might help others if you accepteds the message from @microchip8 as the solution.

[Jcgreco]

That is correct it’s fixed