Orbi WiFi 7 RBE973
Reply

Re: R6400v2 firmware corrupted

andresbarrones
Aspirant

R6400v2 firmware corrupted

Hi I have a problem with my R6400v2 router. I tried to install the TomatoFirmware firmware but it seems that there has been a failure in the installation and the system has been corrupted.
The router does not stop restarting, I leave you a video for you to see. Any advice on what to do or how I can solve this error.
I have already reset the factory with the back button but nothing keeps doing the same.

Model: R6400|AC1750 Smart WiFi Router
Message 1 of 4

Accepted Solutions
plemans
Guru

Re: R6400v2 firmware corrupted

You can try recoving it with tftp or nmrpflash.  

are you on windows? if so, follow this guide

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

 

just make sure you enable tftp 

https://www.thewindowsclub.com/enable-tftp-windows-10

 

and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done. 

https://www.youtube.com/watch?v=R9DLrLQrpaw

 

and if that doesn't work, you can try using nmrpflash

https://github.com/jclehner/nmrpflash

 

If that doesn't work, check on the tomato forums as they'll be more familar with undoing what their firmware did. 

View solution in original post

Message 4 of 4

All Replies
BobBaniak
Tutor

Re: R6400v2 firmware corrupted

It doesn't exist and there has never existed Tomato software for R6400v2. Sorry.

Model: R6400|AC1750 Smart WiFi Router
Message 2 of 4
andresbarrones
Aspirant

Re: R6400v2 firmware corrupted

ok but do you have any idea how to repair the device?

Message 3 of 4
plemans
Guru

Re: R6400v2 firmware corrupted

You can try recoving it with tftp or nmrpflash.  

are you on windows? if so, follow this guide

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

 

just make sure you enable tftp 

https://www.thewindowsclub.com/enable-tftp-windows-10

 

and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done. 

https://www.youtube.com/watch?v=R9DLrLQrpaw

 

and if that doesn't work, you can try using nmrpflash

https://github.com/jclehner/nmrpflash

 

If that doesn't work, check on the tomato forums as they'll be more familar with undoing what their firmware did. 

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 2252 views
  • 1 kudo
  • 3 in conversation
Announcements

Orbi WiFi 7