Orbi WiFi 7 RBE973
Reply

R7000p

Rupa
Follower

R7000p

All lights are red. I tried to unplug and plug back in, still not working
Message 1 of 2
plemans
Guru

Re: R7000p

Try a factory reset? 

Push and hold reset for 7-15 seconds while its powered on. 

or you can try recoving it with tftp or nmrpflash.  

are you on windows? if so, follow this guide

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

 

just make sure you enable tftp 

https://www.thewindowsclub.com/enable-tftp-windows-10

 

and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done. 

https://www.youtube.com/watch?v=R9DLrLQrpaw

 

and if that doesn't work, you can try using nmrpflash

https://github.com/jclehner/nmrpflash

 

 

If none of those work, it might be a hardware failure. 

 

Message 2 of 2
Top Contributors
Discussion stats
  • 1 reply
  • 242 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 7