R8500 reboot loop

[Tommyboy_308-88]

I am having some issues with my R8500 Router/Wifi, after doing an firmware update my power light been flashing for about 5 hrs so i looked online and did this step thinking would work.

After doing this step,it didn`t help  I love my Netgear i don``t want to buy a new device . Hope someone can help me, also it look like it stuck in a Loop it reboots then the blue light come on like its working then goes off and now instead the power light is not blinking it`s solid.

R8500 Firmware Version 1.0.2.26

https://kb.netgear.com/30188/R8500-Firmware-Version-1-0-2-26

How to upload firmware to a NETGEAR router using TFTP client? | Answer | NETGEAR Support

[plemans]

You can try recoving it with tftp or nmrpflash.  

are you on windows? if so, follow this guide

https://kb.netgear.com/000059634/How-to-upload-firmware-to-a-NETGEAR-router-using-Windows-TFTP

just make sure you enable tftp 

https://www.thewindowsclub.com/enable-tftp-windows-10

and here's a video walk through using a tftp client. Use the built in one for windows 10 though. the video is more of an example of how its done. 

https://www.youtube.com/watch?v=R9DLrLQrpaw

and if that doesn't work, you can try using nmrpflash

https://github.com/jclehner/nmrpflash